A-designs 500HR
Accessoires pour Modules d'Effets de A-designs![]()
Distribué par Funky Junk France
Prix public :
NC
Argus :
226,00 € (...)
A-designs 500HR : l'avis de moosers
Avis Global
Les modèles A-500HR est un simple de deux espaces 500 boîtier en rack série. Habituellement 500 racks série viennent dans six ou dix boîtiers d'espace, il est donc rare de voir celui qui n'a que deux places. L'unité est un morceau seul espace rack de matériel, montage dans un tubage en rack traditionnels, qui est également rare pour une unité de la série 500 en rack. Il possède des entrées et sorties XLR pour chacun des deux canaux, et dispose d'une prise d'alimentation standard de cordon dans le dos aussi. Il ya un peu différents avantages et inconvénients concernant cette unité. Je vais commencer par dire que c'est le moyen le moins cher vous pouvez vous creuser 500 modules de la série, même si c'est aussi le plus limité dans son expansion, car il a seulement deux espaces. L'avantage avec ce c'est que c'est a obtenu son propre bloc d'alimentation de sorte que c'est un début faible coût pour rayonnages jusqu'à deux modules de la série 500. Je n'ai pas vu tous les autres là-bas qui ont moins de six espaces pour les modules, qui sont bien sûr plus cher. Si vous prévoyez que sur l'aide de deux modules de la série 500 dans votre caravane, c'est le chemin à parcourir car il coûte le moins cher pour les rack. Toutefois, si vous avez décidé à l'avenir que vous voulez ajouter plus de modules, vous devriez être pas de chance, comme avec quelque chose comme le 6 fente ou API Brent Averill, vous auriez la possibilité d'ajouter plus de modules. À mon avis, ça vaut le coup pour obtenir les espaces supplémentaires, sauf si vous êtes vraiment serré ou l'espace, et / ou si vous cherchez quelque chose d'un peu plus portable. Même si cela coûte un peu plus pour obtenir un rack six sous de la série 500, à mon avis c'est bien la peine car vous pouvez ajouter plus de modules. De plus en plus font des 500 racks série, de sorte que même si les modèles A-500HR offre les plus bas frais de démarrage, je pense que vous verrez que ça vaut le coup de dépenser quelques dollars supplémentaires à vivre vous-même les options à l'avenir
Voir / éditer source la source en anglais
The A-Designs 500HR is a simple two space 500 series rack casing. Usually 500 series racks come in six or ten space casings, so it’s rare to see one that only has two spaces. The unit is a single space rack mountable piece of gear, fitting in any traditional rack casing, which is also rare for a 500 series rack unit. It’s got XLR inputs and outputs for each of the two channels, and has a standard power cord jack in the back as well. There are a few different pros and cons concerning this unit. I’ll start off by saying that this is the cheapest way you can rack your 500 series modules, although it’s also the most limited in it’s expansion since it’s only got two spaces. The upside with this is that it’s got it’s own power supply so it’s a low start up cost for racking two 500 series modules. I haven’t seen any others out there that have less than six spaces for modules, which are of course more expensive. If you’re planning on only using two 500 series modules in your rig, this is the way to go as it costs the least to rack them. However, if you decided in the future that you wanted to add more modules, you’d be out of luck, as with something like the 6 slot API or Brent Averill, you’d have the option of adding more modules. In my opinion, it’s worth it to get the extra spaces unless you’re really tight or space, and/or you’re looking for something a bit more portable. Even though it costs a little bit more to get a six slot 500 series rack, in my opinion it’s well worth it as you can add more modules. More and more companies are making 500 series racks, so even though the A-Designs 500HR offers the lowest start up cost, I think you’ll find that it’s worth it to spend a few extra bucks to live yourself options in the future…
Texte original anglais : Overall Opinion
The A-Designs 500HR is a simple two space 500 series rack casing. Usually 500 series racks come in six or ten space casings, so it’s rare to see one that only has two spaces. The unit is a single space rack mountable piece of gear, fitting in any traditional rack casing, which is also rare for a 500 series rack unit. It’s got XLR inputs and outputs for each of the two channels, and has a standard power cord jack in the back as well. There are a few different pros and cons concerning this unit. I’ll start off by saying that this is the cheapest way you can rack your 500 series modules, although it’s also the most limited in it’s expansion since it’s only got two spaces. The upside with this is that it’s got it’s own power supply so it’s a low start up cost for racking two 500 series modules. I haven’t seen any others out there that have less than six spaces for modules, which are of course more expensive. If you’re planning on only using two 500 series modules in your rig, this is the way to go as it costs the least to rack them. However, if you decided in the future that you wanted to add more modules, you’d be out of luck, as with something like the 6 slot API or Brent Averill, you’d have the option of adding more modules. In my opinion, it’s worth it to get the extra spaces unless you’re really tight or space, and/or you’re looking for something a bit more portable. Even though it costs a little bit more to get a six slot 500 series rack, in my opinion it’s well worth it as you can add more modules. More and more companies are making 500 series racks, so even though the A-Designs 500HR offers the lowest start up cost, I think you’ll find that it’s worth it to spend a few extra bucks to live yourself options in the future…
Ajouter fichier audio
Dans mon matos