Annonces PPM608
Alerte nouvelle annonceImages
Avis
4.0/5(1 avis)
100 %
Donner un avis
JimboSpinsPortable sorte, mais encore de lourdes
Publié le 01/01/13 à 07:50
(contenu en anglais)The Mackie PPM608 is a very portable and small mixer. This is the type of mixer to have if you need to have a lot of channels to work with and still need some good compression. There are effects on this mixer that are pretty decent for it being a small and at this price. The 3 band EQ is on each of the 8 channels giving you great control over the input sound. But for this mixer to be small it still weighs 25 pounds! That is still a good amount of weight for a small portable mixer.
One of the most attractive things about this mixer is that you crank it up to max volume with compression and limiters on it and it will not get distorted at all. The sound will still sound very clean and crisp. Pair this up with a good pair of monitors and you will have a professional sound.
At first I thought the price of this mixer was a little too much because it cost 700 dollars and I have used other mixers that are basically the same but cost about 150 bucks less! But after hearing it and seeing how well it is made, I would have no issue purchasing this for us again. I do however think that some of that price is going to the “Mackie” name because they also tend to charge a little more than other name brands do especially when it comes to live sound equipment.
This 1,000 watt mixer will give you the sound you need for your live event, as long as you do not need more than 8 channels then this D Class amp should suit you just fine and it will also last a long time too. It is well and gives you a great sound. I recommend this mixer especially if you already have a good set of monitors to compliment it.
One of the most attractive things about this mixer is that you crank it up to max volume with compression and limiters on it and it will not get distorted at all. The sound will still sound very clean and crisp. Pair this up with a good pair of monitors and you will have a professional sound.
At first I thought the price of this mixer was a little too much because it cost 700 dollars and I have used other mixers that are basically the same but cost about 150 bucks less! But after hearing it and seeing how well it is made, I would have no issue purchasing this for us again. I do however think that some of that price is going to the “Mackie” name because they also tend to charge a little more than other name brands do especially when it comes to live sound equipment.
This 1,000 watt mixer will give you the sound you need for your live event, as long as you do not need more than 8 channels then this D Class amp should suit you just fine and it will also last a long time too. It is well and gives you a great sound. I recommend this mixer especially if you already have a good set of monitors to compliment it.
10
»
Fiche technique
- Fabricant : Mackie
- Modèle : PPM608
- Série : PPM
- Catégorie : Consoles amplifiées
- Fiche créée le : 18/04/2008
|
Mélangeur amplifié professionnel ultra léger, 1000 W, 8 voies complètes, avec processeur numérique 32 bits RMFX+™ intégré
|
|
|
•
|
Amplificateurs de puissance 500 W + 500 W de classe D à rétablissement rapide (Fast Recovery™) conçus par Mackie
|
|
•
|
Processeur 32 bits RMFX+™ comprenant 24 reverbs, chorus et retards à calage manuel "prêts à jouer" en applications live
|
|
•
|
8 préamplis micro Mackie de première qualité avec alimentation fantôme 48 V et inserts à jack 3 points (voies 1-6)
|
|
•
|
La nouvelle compression dédiée en ligne procure une présence et du punch supplémentaires pour les voix et les instruments
|
|
•
|
2 entrées stéréo avec double entrée RCA et double entrée jack 6,35 mm de niveau ligne pour plus de souplesse de connexion
|
|
•
|
Égaliseur actif 3 bandes Mackie (80 Hz, 2,5 kHz, 12 kHz) par voie
|
|
•
|
2 boîtiers de direct (DI) pour le raccordement direct d'instruments
|
|
•
|
Départs auxiliaires indépendants pour retour et effet
|
|
•
|
Double égaliseur graphique 7 bandes sur les sorties générales et de retours pour compenser la pièce et pour les mixages de retour
|
|
•
|
Amplificateur à 3 modes pour un routage ultra flexible, commutable entre généraux stéréo G/D, généraux mono/retour 1, et retour 1 & retour 2
|
|
•
|
Égaliseur dédié aux enceintes passives de précision pour une clarté et une réponse en BF accrues avec les enceintes passives Mackie
|
|
•
|
Robustes poignées en métal intégrées aux flancs du boîtier du mélangeur pour un transport facile d'un spectacle à l'autre
|
|
•
|
À toute épreuve et renforcé en ABS polycarbonate, le PPM608 reprend le devant de châssis arrondi classique de Mackie. Donc, si le PPM roule sur sa face avant durant le transport, les commandes sont en retrait et protégées
|
|
•
|
Ultra léger et portable (9 kg)
|
»
Autres dénominations : ppm 608