Annonces ATW-1301
Alerte nouvelle annonceFiche technique
- Fabricant : Audio-Technica
- Modèle : ATW-1301
- Catégorie : Systèmes sans fil
- Fiche créée le : 25/01/2015
ATW-RC13 Rack-mount receiver chassis, ATWRU13 receiver unit and ATW-T1001 UniPak® transmitter. Select a Wireless Essentials® microphone or cable to complete the system.
System 10 Pro Features
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range – completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- Three levels of diversity assurance: frequency, time & space
- Ground-lift switch helps eliminate audible hum caused by ground loops
System 10 Pro Specs
|
Overall System Specs | |
|---|---|
| Operating Frequencies | 2.4 GHz ISM band |
| Dynamic Range | >109 dB (A-weighted), typical |
| Total Harmonic Distortion | <0.05% typical |
| Operating Range | 60 m (200') Open range env. with no interfering signals |
| Operating Temperature Range | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
| Frequency Response | 20 Hz to 20 kHz Depending on microphone type |
|
Receiver Specs | |
|---|---|
| Receiving System | Diversity (frequency/time/space) |
| Output Connectors | Remote Receiver Connector: RJ45 Link Connector: RJ12 |
| Maximum Output Level | XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV |
| Power Supply | 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external |
| Dimensions | 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D |
| Net Weight | 940 grams (33.2 oz) |
| Accessory Included | Power supply |
| Accessories Included | AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet |
|
Body-Pack Transmitter Specs | |
|---|---|
| RF Power Output | 10 mW |
| Spurious Emissions | Following federal and national regulations |
| Input Connections | Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
| Batteries | Two 1.5V AA not included |
| Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
| Net Weight | 100 grams (3.5 oz) without batteries |
|
Handheld Transmitter Specs | |
|---|---|
| RF Power Output | 10 mW |
| Spurious Emissions | Following federal and national regulations |
| Batteries | Two 1.5V AA not included |
| Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
| Net Weight | 280 grams (9.9 oz) without batteries |
| Accessory Included | AT8456a Quiet-Flex™ stand clamp |
Distribué par Audio-Technica Europe
»
Autres catégories dans Micros sans fil
Autres dénominations : atw1301