Crest Audio Pro-LITE 7.5 DSP

Ampli de sono 2 canaux de la marque Crest Audio appartenant à la série Pro-LITE

Écrire un avis ou Demander un avis

Présentation du produit Présentation

Avis

Comparateur de prix

Petites annonces

Forums

Annonces Pro-LITE 7.5 DSP

Alerte nouvelle annonce

Fiche technique

Fabricant : Crest Audio
Modèle : Pro-LITE 7.5 DSP
Série : Pro-LITE
Catégorie : Amplis de sono 2 canaux
Fiche créée le : 26/10/2015

Rated Watts 2ch x 2 ohms	4800 watts 20ms repetitive burst / 3790 watts 1% THD both channels driven @ 1kHz.
Rated Watts 2ch x 4 ohms	2810 watts 20ms repetitive burst / 2450 watts 1% THD / 2030 watts 0.15% THD, both channels driven @ 1kHz.
Rated Watts 2ch x 8 ohms	1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz.
Minimum Load Impedance	2 ohms
Maximum RMS Voltage Swing	124 volts
Frequency Response	20Hz - 25kHz; +0dB, -3dB
20Hz - 20kHz 2ch x 2 ohms	<0.5% @ 3390 watts 20Hz to 4kHz, decreasing to 3100 watts @ 20kHz, both channels driven.
20Hz - 20kHz 2ch x 4 ohms	<0.15% @ 1850 watts 20Hz to 20kHz, both channels driven.
20Hz - 20kHz 2ch x 8 ohms	<0.15% @ 1170 watts 20Hz to 20kHz, both channels driven.
Input CMRR	> - 75dB @ 1 kHz
Voltage Gain	x 40 (+32dB)
Crossover	100Hz switchable 2nd order high pass and 3rd low pass per channel.
Crosstalk	> -60dB @ 1kHz @ 1000 watts power @ 8 ohms.
Hum and Noise	> -100dB, "A" weighted referenced to rated power @ 4 ohms.
Slew Rate	> 12V/μs
Damping Factor (8 ohms)	> 200:1 @ 20Hz - 1kHz @ 8 ohms
Phase Response	+15 to -85 degrees from 20Hz to 20kHz
Input Sensitivity	2.25 volts +/- 3% for 1kHz 4 ohm rated power, 2.2 volts +/- 3% for 1kHz 2 ohm rated power
Input Impedance	20 kilohms, balanced and 10 kilohms unbalanced.
Current Draw @ 1/8 in VA (watts)	2210 (1440) @ 2 ohms, 1550 (950) @ 4 ohms, 985 (560) @ 8 ohms
Current Draw @ 1/3 in VA (watts)	4260 (3150) @ 2 ohm, 3120 (2160) @ 4 ohms, 1890 (1200) @ 8 ohms
Idle Consumption	250VA, 120 watts.
Cooling	3 temperature dependent variable speed fans.
Controls	2 front panel attenuators, crossover select switch for HPF, Normal and LPF
Indicator LEDs	Five LED indicators per channel: Active, Signal, DDT, Temperature and DC
Protection	Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors	Inputs: Dual combination 1/4” XLR, Outputs: Dual 1/4” thru, one 2-pin & one 4 pin twist-lock connector
Construction	0.062” thick aluminum
Dimensions	3.5”x19”x 17” behind front panel + 0.6” for handle
Net Weight	6.61kg (14.6lbs.*)
Gross Weight	8.34kg (18.4lbs.)

Source : http://www.peaveycommercialaudio.com/products.cfm/cr/Power-Amplifiers/Pro-LITE-Series/ProLITE-7.5-DSP

Distribué par audia

Autres catégories dans Amplis de puissance sono

Autres dénominations : prolite 7 5 dsp, prolite75dsp, prolite75 dsp, pro lite7 5 dsp, pro lite 7 5dsp