DPA Microphones ST2011C

Name: ST2011C
Brand: DPA Microphones
SKU: 241345

Kit microphones de la marque DPA Microphones appartenant à la série d:dicate

Écrire un avis ou Demander un avis

Avis

Forums

Sommaire - accès rapide

Acheter neuf DPA Microphones ST2011C

Alerte nouvelle annonce

Voir les 15 photos du DPA Microphones ST2011C

Directional pattern	Cardioid
Principle of operation	Pressure gradient, with interference tube
Cartridge type	Pre-polarized condenser, Twin Diaphragm Capsule
Frequency range	20 Hz - 20 kHz
Frequency range, ± 2 dB, at 30 cm	50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz	10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted	Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4	Typ. 33 dB (max. 36 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)	Typ. 74 dB(A)
Total Harmonic Distortion (THD) at 1 kHz	< 1 % up to 137 dB SPL peak
Dynamic range	Typ. 117 dB
Max. SPL, peak before clipping	146 dB
Minimum load impedance	2 kohm
Output impedance	< 200 ohm
Cable drive capability	100 m (328 ft)
Output balance principle	Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR)	> 50 dB
Power supply (for full specifications)	48 V Phantom power (± 4 V)
Current consumption	2.8 mA
Connector	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color	Matte black
Weight	64 g (2.3 oz)
Microphone diameter	19 mm (0.75 in)
Microphone length	92 mm (3.6 in)
Output voltage, RMS	> 4 V
Polarity	+V at pin 2 for positive sound pressure
Temperature range	-40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH)	Up to 90%
Sensitivity selection tolerance (at 1 kHz)	± 1.5 dB