Se connecter
Se connecter

ou
Créer un compte

ou
Filtres
3.1/5
(11 avis)
45 %
(5 avis)
27 %
(3 avis)
18 %
(2 avis)
9 %
(1 avis)
Donner un avis
Cible : Tout public
Avis des utilisateurs
  • sof@surfersof@surfer

    Correct pour une pédale d'appoint

    Line 6 EX-1 Expression PedalPublié le 15/05/18 à 17:08
    Je l'utilise sur un pédalier firehawk FX pour avoir une fonction de pédale de volume dédiée.

    Elle semble assez robuste, par contre la course est assez approximative, ce qui la rend désagréable sur une utilisation intensive, comme pour un effet wha ou un effet progressif.

    A n'utiliser que comme pédale d'appoint, par exemple une pédale de volume qui ne sert qu'à ajuster le niveau sonore durant un morceau...
  • nickname009nickname009

    Line 6 EX-1 Expression PedalPublié le 26/02/12 à 11:55
    contenu en anglais (contenu en anglais)
    I currently have two of these to maximize the use of my m9. It’s a pretty good looking pedal and isn’t too costly either. It also comes with a little patch cord to connect with, which is nice, except it’s a very very cheap cord with plastic casing and one of them broke on impact while still in its original box. Weird. But I have plenty of patch cables hanging around so it’s okay, sort of.
    As for the pedal, I like the size it’s not as big as the boss one as far as I know and it’s quite smooth when using it. Can’t really complain about that. But you can kind of tell it’s cheaply made, the input jack ring is plastic, and I know that’s going to break or crack some day, it’s bound to. There’s also an output label on the side but it’s plugged with a plastic piece. As if this used to be another type of pedal (volume pedal maybe?) and they just simply plugged up the input part and started selling this as an expression pedal. So it’s definitely somewhat of a cheap-ish pedal.

    However, in terms of use, I haven’t had any problems with it so far. I am just seriously hoping that in the long run this will last. Though I haven’t heard of anybody actually having any problems with these expression pedals so far. I’m just crossing my fingers hoping that I don’t have too much bad luck with these pedals. I’m glad I got two, I did originally intend to use both at the same time but since I only really use one foot at a time 2 is not really necessary, and the 2nd one is now a spare in case the first breaks down somehow.

    Overally it’s a cheap expression pedal. There are better ones out there and I’d recommend those if you have the extra cash to spend. These are nothing but decent.
  • manfadmanfad

    Line 6 EX-1 Expression PedalPublié le 20/04/05 à 11:49
    Je vous joins le mode d'emploi pour calibrer la EX-1 avec un pédalier FBV SHORTBOARD et un POD XT si cela peut éviter à quelques personnes de perdre 4-5 heures et son sang froid...

    Here are the calibration instructions for the pedals (you really should calibrate both at the same time):
    1. Move both pedals to their center positions roughly halfway between the MAX and MIN position.
    2. Press BANK DOWN+MODULATION+DELAY and hold for three seconds. This will reset the calibration values for the pedals to their default values (il n’y a pas d’indication à l’écran de ce mode reste caché).
    3. Press STOMP+DELAY+REVERB and hold for three seconds. This will now display the pedal information for the LEF…
    Lire la suite
    Je vous joins le mode d'emploi pour calibrer la EX-1 avec un pédalier FBV SHORTBOARD et un POD XT si cela peut éviter à quelques personnes de perdre 4-5 heures et son sang froid...

    Here are the calibration instructions for the pedals (you really should calibrate both at the same time):
    1. Move both pedals to their center positions roughly halfway between the MAX and MIN position.
    2. Press BANK DOWN+MODULATION+DELAY and hold for three seconds. This will reset the calibration values for the pedals to their default values (il n’y a pas d’indication à l’écran de ce mode reste caché).
    3. Press STOMP+DELAY+REVERB and hold for three seconds. This will now display the pedal information for the LEFT INTERNAL PEDAL.
    4. Move the pedal to its MIN position and press down (pedal all the way heel down).
    Move the pedal to its MAX position (pedal all the way toe down) and press down hard enough to actuate the pedal’s toe switch.
    5. Check the range on the MAX (number displayed on right hand side of display) and MIN (number displayed second from right hand side of display). MIN should be 000, MAX should be 127
    6. Move the pedal to its MIN position. With the pedal just sitting there, check the number displayed in the second column (111). It should read 000. Press the pedal down at the heel position. This number should still read 000.
    7. Press BANK DOWN+STOMP+DELAY and hold for three seconds. This will now display the pedal information for the RIGHT EXTERNAL PEDAL.

    activer la pédale les chiffres bougent....

    Eteindre le POD XT et rallumer, débrancher et rebrancher la pédale d’expression. C’est cette dernière manipulation qui me manquait, à priori mon POD XT ou mon FBV-SB ne reconnnait pas la pédale si elle n’est pas branchée après la mise en marche du POD ?
    Aussi rien ne sert de faire cliquer la pédale EX-1, ça risque de faire mal, il n’y a pas de clic en fin de course.

    Dans le menu du POD XT je n’ai pas trouvé le menu PEDAL ASSIGN comme il est précisé dans la doc du POD.
    Sinon c'est une pédale en plastique voir l'autre avis...
    Lire moins