Amt Electronics M2 Marshall JCM800

• Fabricant : Amt Electronics
• Modèle : M2 Marshall JCM800
• Série : Legend Amps 2
• Catégorie : Simulateurs d'amplis/baffles guitare en pédales
• Fiche créée le : 14/11/2012

When connected to the amp or a mixer La-2 acts as a two-channel preamp providing switch between clean and overdriven channels by means of a footswitch. CLEAN channel is universal for all models of the series and sounds in the style of classic Fender amps.

When using LA-2 in effect mode the “clean” channel of an external amplifier or a combo is used. Please be aware that the used combo or amplifier largely determines the resulting sound.

When in effect mode the series uses “partial” active bypass, which reduces the need to minimize the length of used cables and retains the original sound of the instrument when the effect is off.

– OD LEVEL adjusts the overall loudness of the pedal output
– OD GAIN adjusts the amount of distortion and drive
– HIGH controls the amount of high frequency in the signal
– MIDDLE controls the amount of mid frequency in the signal
– BASS controls the amount of bass frequency in the signal
– CL LEVEL adjusts the buffer output of the bypassed signal, 1 o’clock positioning represents standard -10dB level
– CL BOOST SWITCH engages a boost of clean signal up to +8dB when the pedal is bypassed, making the pedal a 2-channel preamp

– Three outputs (CAB SIM OUT, PREAMP OUT, DRIVE OUT)
– Simultaneous use of all three outputs at once
– Optional clean level and clean boost controls when bypassed (only with CAB SIM OUT and PREAMP OUT)
– LED indicator when effect is engaged SPECIFICATIONS:
– 9-12v DC power negative center (-), adapter or battery
– Low power consumption
– Small size: 110 x 62 x 58 mm