Annonces Dizzy Bird
Alerte nouvelle annonceFiche technique
- Fabricant : Benson Amps
- Modèle : Dizzy Bird
- Catégorie : Têtes d'ampli guitare tout lampe
- Fiche créée le : 03/02/2018
The Dizzy Bird can be used in a few different ways. 1. Use the Tall Bird and the Vinny sections completely independently...on different sources. 2. Use the Tall Bird into the Vinny...these are internally connected in this order when you plug into the input on the front and use the direct or speaker outs on the back. 3. Use the Vinny into the Tall Bird by running an instrument cable from the direct out on back into the input on the front, and use the output on the front going to another amp. The speaker output on the back can still be used, but the signal would be without reverb. This is nice for a wet-dry setup. Specs Tubes: 3x12AX7s 1x12AU7 1xEL84 1 Watt output into 8 ohms Dimensions/weight Head 13.5”W 8”H 8.25”D 14 lbs Build Point to point construction on terminal strips - no circuit, eyelet or turret board Carbon Comp resistors Mallory 150M tone capacitors DC filments for low noise Baltic birch head cabinet
Autres catégories dans Têtes d'amplis guitare
Autres dénominations : dizzyverb