Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Ashdown Klystron 500 Head
Photos
1/83

Tous les avis sur Ashdown Klystron 500 Head

Tête d'ampli Basse de la marque Ashdown appartenant à la série Klystron

Insatisfait(e) des avis ci-contre ?
Filtres
4.5/5
(3 avis)
33 %
(1 avis)
33 %
(1 avis)
Donner un avis
Avis des utilisateurs
  • Anonyme

    un super ampli basse

    Ashdown Klystron 500 HeadPublié le 09/03/13 à 17:11
    ampli basse 500w

    UTILISATION

    ouai ça sonne direct

    SONORITÉS

    du punk au blues

    AVIS GLOBAL

    franchement, à 1500€ (sur nuostore) le ASHDOWN KLYSTRON EVO 3 C115-500 575w est probablement le meilleur ampli basse sur le marché en 500w à ce prix

    je joue du blues, du punk et un pote l'a testé en jazz... et ça passe!!!

    incroyable le son chaud de cet ampli

    prévoir quelques bières pour rentrer de la répet pour pas être trop essoufflé sur le retour car ça pèse son poids le bestiau
    Lire la suite
    ampli basse 500w

    UTILISATION

    ouai ça sonne direct

    SONORITÉS

    du punk au blues

    AVIS GLOBAL

    franchement, à 1500€ (sur nuostore) le ASHDOWN KLYSTRON EVO 3 C115-500 575w est probablement le meilleur ampli basse sur le marché en 500w à ce prix

    je joue du blues, du punk et un pote l'a testé en jazz... et ça passe!!!

    incroyable le son chaud de cet ampli

    prévoir quelques bières pour rentrer de la répet pour pas être trop essoufflé sur le retour car ça pèse son poids le bestiau
    Lire moins
  • iamqmaniamqman

    Meilleure période de tonalité graves!

    Ashdown Klystron 500 HeadPublié le 18/03/11 à 19:30
    contenu en anglais (contenu en anglais)
    I want to say there were less than 100 or 200 of these things made. I believe John Entwistle from The Who collaborated with Ashdown to design this preamp befor he died. My band picked one of these up a few years ago by trading some gear. I wish that Ashdown would bring back a reissue of this pre with the ABM 1000. We had this combo pared with an 8x12 Ampeg cab. The bass tone we got with this preamp was so full and filling in the room, and recording with it was a pleasure. The thing had an FET circuit that gave such a warmth to the tone that GK or Ampeg could never even match.

    UTILIZATION

    We had to play around with it a little bit to find the sweet spot. This was our first Ashdown product so the unfamiliarity factor was apparent. I think it took us some trial and error but eventually we found a good tone for the guitar and cab we were using. Since then we have changed things around but I remember most of the dials were set around noonish. The preamp was constructed to stay around the mid point and dial in the EQ with just very little shifting of the knobs. I used more of the Valve drive knob and the Sub harmonic to really tailor the tone. These two features are fantastic! Being able to dial in a little grind to bass while adding sub octave chorus to the tone was amazing. To this day I haven't played a better bass head or preamp that could match up to this tone. John was a tone purist...just look at his ugly bass guitar condor bird he built for himself. He said it looked ugly but had a tone no other guitar could match and this preamp follows that same approach to music. Although this unit was nice to look at.

    We didn't get a manual since we got it on the used market but Ashdown does have a manual available on their website if you get the pleasure of finding one of these pre's.

    SOUNDS

    The tone was remarkable! Just pure bliss, which makes listening to the bass a little pleasurable. I usually ran the Valve and Sub around 2:00 and I enjoyed having these two knobs follow each other since they blended so well. The compression we used sparingly since I found that it doesn't allow the bass to bloom as much but gave a little more bottom end. So this knob was just barely engaged.

    We used this with a Rickenbacker 4003 and a ABM1000 power amp. We had some trouble with the power amp but luckily we had a spare. We had a solid rock/metal bass tone that fit in with just about any band situation...other than jazz fusion.

    Since they only built a hand full of these things not many people are even going to play them. However. Ashdown brought back the Klystron in a head form a few years ago and to which they discontinued that as well. However, you can still find some around on ebay and such. Now I believe the new EVO lll's are the new recreation of the Klystron. It seems to have the exact same features and sound.

    OVERALL OPINION

    There isn't anything to say negatively about this preamp. It was the perfect unit to get blooming, punchy, and responsive bass tone. It was warm and smooth while staying very tight and driving. So many professionals turn to Ashdown for their bass needs and this preamp to me is the best they ever did.

    I would recommend trying to find this preamp if you can because it could be a collectors item at some point. If you need something right now then I would look at new EVO lll.
  • sadcandlelightsadcandlelight

    Ashdown Klystron 500 HeadPublié le 17/10/08 à 13:02
    Spécifications du site Ashdown:

    Power Output (RMS) 575W
    Frequency Response -3dB at 17Hz and 30kHz
    Speaker Outputs Minimum impedance 4 Ohms
    High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20V p-p
    Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p
    Line Input Impedance 22k Ohms, input level 0dBu nominal
    Line Output Impedance 10k Ohms, level 0dBu nominal
    DI Output 600 ohms balanced, level -20dBu nominal
    Tuner Output Impedance 1k Ohms, level 0dBu nominal
    EQ Bass +/-15dB @ 45Hz
    Middle +/-15dB @ 660Hz
    Treble +/-15dB @ 7kHz shelving
    Slider 1 +/-15dB @ 110Hz
    Slider 2 +/-15dB @ 340Hz
    Slider 3 +/-15dB @ 1.3kHz
    Slider 4 +/-15dB @ 2.6kHz
    Shape (…
    Lire la suite
    Spécifications du site Ashdown:

    Power Output (RMS) 575W
    Frequency Response -3dB at 17Hz and 30kHz
    Speaker Outputs Minimum impedance 4 Ohms
    High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20V p-p
    Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p
    Line Input Impedance 22k Ohms, input level 0dBu nominal
    Line Output Impedance 10k Ohms, level 0dBu nominal
    DI Output 600 ohms balanced, level -20dBu nominal
    Tuner Output Impedance 1k Ohms, level 0dBu nominal
    EQ Bass +/-15dB @ 45Hz
    Middle +/-15dB @ 660Hz
    Treble +/-15dB @ 7kHz shelving
    Slider 1 +/-15dB @ 110Hz
    Slider 2 +/-15dB @ 340Hz
    Slider 3 +/-15dB @ 1.3kHz
    Slider 4 +/-15dB @ 2.6kHz
    Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave

    Effects Send Impedance 22k Ohms, level 0dBu nominal
    Effects Return Impedance 22k Ohms, input level 0dBu nominal
    H x W x D (mm) 310 x 470 x 240
    Weight (kg) 16

    UTILISATION

    Elle reprend les caractéristiques des têtes de la serie ABM donc de nombreux réglages possibles.
    Il faut prendre quelques minutes pour prendre ses marques, trouver l'utilité de chaque boutons.
    Pas de manuel fournis mais on peut le télécharger sur le site de la marque.
    Les branchements sont bien conçus: deux branchements speakon/jack pour les baffles.

    Le plus de cette tête c'est son look. Un pure merveille, relativement compact et le vu mètre qui s'alume avec la tête ça fait trémousser le poil dans le slip.

    Assez puissante pour les répetes et les concerts, pas besoin d'être repiqué pour les salles de 200 personnes max.

    Après un an d'utilisation... toujours aussi satisfait de la qualité de cette tête. Tous les réglages sont vraiment bien conçus et on peut facilement chopper un son de malade.
    On répète dans un groupement de salles et nombreux sont les bassistes qui me disent que j'ai un super son. Le footswitch fournis avec permet d'activer le compresseur, l'octaveur, la drive et l'équalisation.

    SONORITÉS

    Je l'utilise principalement pour du rock. Il n'y a qu'à écouter With or without you de U2 pour imaginer le son qui sort de cette tête.
    Le valve drive intégré et très très aprécié. Il procure une overdrive très chaude.
    Un autre effet intégré c'est le sub-harmonics, il balance des graves en plus. C'est super simpa quand on monte dans les aigus. Fini la basse criarde sur les deux premières cordes.
    Du son claquant au son rond et gras cette tête vous offriera tous les sons que vous recherchez.

    Je confirme mes propos après un an. Cette tête est vraiment polyvalente et offre la qualité d'une tête à lampe.

    AVIS GLOBAL

    Voila plusieurs mois que je l'utilise. Cette tête est vraiment un pure merveille. A chaque concert on me dit que j'ai un son de basse sublime, les ingé son kiff eux aussi car elle est très facile à repiquer (D.I. en façade, line out en back).
    Ashdown est une marque encore peu connue mais cela ne saurait durer avec du matos de cette qualité avec des prix bien inférieurs à la concurence.
    Le point négatif c'est son prix, je l'ai commandé directement d'angleterre pour 870€ port inclus comparé au 1500€ en france. Malheuresement vous avez été nombreux à me demander le site ou je l'ai acheté et ils ne la proposent plus je ne sais pour quelle raison, mais je pense qu'en fouillant un peu on aura pas de mal à avoisiner ce prix. 
    Après un an je referais ce choix sans hésiter!
    Lire moins