Se connecter
Se connecter

ou
Créer un compte

ou
< Tous les avis Boss BF-2B Bass Flanger
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Boss BF-2B Bass Flanger
Photos
1/178
Boss BF-2B Bass Flanger
iamqman iamqman

« Boss Bass Beef »

Publié le 07/07/11 à 00:40
contenu en anglais (contenu en anglais)
Boss decided to go back and rehash the Boss Bf-2 pedal and tweak it to receive the lower frequencies associated with the bass guitar. They came out with the Boss BF-2B specifically designed for the bass guitar player.

it only had four control knobs which is usual for most Boss pedals. You had a manual which control the level or volume of the unit. Next you had depth which controlled the sweep range and width of the modulation. Then you had the rat control knob that changed the speed to which the flanger would repeat. Finally, you had which set the overall amount of feedback the pedal would produce.

UTILIZATION

Specifications

Controls: Manual, Depth, Rate, Res
Connectors: Input, Output, AC Adaptor
Current Draw: 14 mA (DC 9V)
Weight: 400 g (15 oz.)
Input Impedance: 470 kOhm
Residual Noise Level: -95 dBu (IHF-A, Typ.)
Recommended Load Impedance: 10kOhm or greater
Delay Time: 0.5 ms ~ 6.5 ms
LFO Speed: 100 ms ~ 16 s
Recommended AC Adaptor: ACA Series


SOUND QUALITY

The tone of this is very similar to the Boss BF-2 designed for guitars. This pedal will give bass players the feature of having that jumbo jet whoosh sound much like the sound of Eddie Van Halen's guitar from the sound "Unchained" and "And the Cradle will Rock". So if your are interested in getting a wide flanger tone to your bass then this is the pedal to achieve that sound with.

not important which guitar you use or which amp you use with this pedal, you are going to get a cool sounding jet flanger unit that will also sound good as a boost if you lower all the control knobs to zero and boost the manual.

OVERALL OPINION

These pedals were discontinued back in 1994 and the used market will be the only way to get one. I would recommend getting a newer pedal that has true bypass in it since these did not have that feature. That way you degrade your signal when the pedal is not engaged. You can probably pick one of these up for well under $100 used in the classifieds section or a forum somewhere.