Sujet HPA de nouveaux amplis ? ...
- 2 réponses
- 2 participants
- 1 843 vues
- 3 followers
RJ64420
11
Nouvel·le AFfilié·e
Membre depuis 10 ans
bonjour tout le monde , voila je recherché quelque info sur un amplis hpa puis en cherchent pas mal je suis tombé sur des amplis que pas grand monde ne vend alors es que c'est une nouvel gamme ou alors pas du tout
tout d'abord la série D voila les info que j'ai trouvé :
j'ai pas de photo pour le D4500 - D6000
Specifications
------ D1000 D1500 D2000 D2500 D4500 D6000
Rate Power
(1 kHz, THD 1%)
8 Ω Stereo 215W 300W 375W 440W 850W 1100W
4 Ω Stereo 350W 500W 650W 750W 1500W 2000W
2 Ω Stereo 500W 750W 1050W 1200W 2250W 3000W
8 Ω Bridge 700W 1000W 1300W 1500W N/A N/A
4 Ω Bridge 1000W 1500W 2100W 2400W N/A N/A
Input Sensitivity (4Ω, 1 kHz) 4 dBu
Input Impedance 30 kΩ Balanced/15 kΩ Unbalanced
Input CMRR (1 kHz) > 50 dB
Frequency Response (±0.5dB) 20Hz~20 kHz
AMP CLASS D
T.H.D (1 kHz, 1/3 Power) < 0.03%
Signal to Noise Ratio > 100 dB
Damping Factor (8 Ω, 400 Hz) > 200
Channel Separation (8 Ω, 1 kHz) > 700 dB
Integrated DSP Processing Crossover : Frequency Range ; 50Hz~3kHz, 24dB/oct
Filters : LowPass & HighPass ( both channels )
Limiter ( Channel independent clip limiter )
PEQ & Time Alignment
Power Supply Switching mode power supply
Power Source AC 100~240V,50/60Hz
Weight (Net) 4.9 kg 4.9 kg 5.2 kg 5.2 kg 5.9 kg 5.9 kg
Dimensions (W x H x D) 482 x 88 x 280
*Specifications and design subject to change without notice for improvements.
When state of the art amplifier technology is combined with a high quality switch mode power supply in a D class amplifier package, you get the higest audio resolution and efficiency. They are much more efficient than conventional amplifiers, they run cooler, lighter, and don't require massive heat sinks and heavy transformers.
This revolutionary ampifier offers the sonic superiority and great reliabiity, in an extremely efficient and lightweight design. Advanced protection circuitry allows operation with greater efficiency into any load condition, under a range of power conditions.
Thermal limiting circuitry ensures stable operation into loads as low as 2 ohms. This thermal limiting circuitry also ensures powerful sound even in extreme load conditions.
The light weight and simple to use built in features, as well as robust circuitry make the D-Deries amplifier range an obvious choice for mobile band and DJ rigs. The versatile features allow setup in virtually any system, without the need for adding extensive amounts external equipment.
d-series-detail-1.jpg
Processing Features
The D Series amplifiers include a number of integrated processing features
which appear on the front panel LCD screen.
MODES
* Stereo : In this mode, Channel 1 input signal goes to Channel 1 output, and Channel 2 input signal goes to Channel 2 output.
* INPUT Y : In this mode, the Channel 1 input signal is sent to the Channel 1 and Channel 2 output. The Channel 2 input signal is ignored.
* BRIDGE : In this mode, the power of both amplifier channels are delivered into a single Mono 8 or 4 ohm load.
FEATURES
* HPF : This filter reduces unwanted, potential energy-robbing low-end frequencies. Setting an appropriate high-pass filter frequency also helps protect the loudspeaker from damage. In this MENU, you can set roll-off frequency which are 40, 50, 63, 80, 100, 125Hz.
* LPF : The roll-off frequency can be set to 6.3K, 8K, 10K, 16K, or 20KHz to prevent un wanted high frequencys from passing to the speaker system.
* PEQ, 8BAND : An 8 band parametric EQ: 100Hz, 200Hz, 400Hz, 800Hz, 1.6KHz, 3.15KHz, 6.3KHz, 12.5KHz. Adjustable Q value and gain for boost and cut. Adjustable Q range is 0.5 ~ 5 by 0.5 step. Adjustable gain range is +/-6dB by 1dB step. Fine tuning your system has never been easier.
* LIMITER : provides your amplifier and system with higher performance and better protection. There is just one parameter of THRESHOLD for easy set up. You can set the threshold level to 0dB, -3dB, -6dB, -12dB.
* DELAY : Total dealy time is 20mS per channel. Adjustable step is that 0~3mS / 0.25mS step, 3~10mS / 1mS step and 10~20mS / 2mS step.
* X-OVER (INPUT Y MODE ONLY) : X-OVER system provides a variable state Linkwitz-Reley 24dB/oct filter allowing you to choose a point between 50Hz and 3.15KHz on 1/5th oct centers.The following points are 50Hz, 56Hz, 64Hz, 74Hz, 85Hz, 98Hz, 112Hz, 129Hz, 148Hz, 171Hz, 196Hz, 225Hz, 259Hz, 342Hz, 392Hz, 451Hz, 518Hz, 595Hz, 684Hz, 786Hz, 903Hz, 1.03KHz, 1.2KHz, 1.37KHz, 1.57KHz, 1.8KHz, 2.08KHz, 2.4KHz, 2.7KHz, 3.15KHz.
puis la série E ... j'ai pas trouvé grand chose sur cette série
lien PDF : http://www2.standardaudio.se/pdf/DATABLAD/HPA/Datablad%20HPA%20E3i%20E5i%20E7I%20EN.pdf
tout d'abord la série D voila les info que j'ai trouvé :
j'ai pas de photo pour le D4500 - D6000
Specifications
------ D1000 D1500 D2000 D2500 D4500 D6000
Rate Power
(1 kHz, THD 1%)
8 Ω Stereo 215W 300W 375W 440W 850W 1100W
4 Ω Stereo 350W 500W 650W 750W 1500W 2000W
2 Ω Stereo 500W 750W 1050W 1200W 2250W 3000W
8 Ω Bridge 700W 1000W 1300W 1500W N/A N/A
4 Ω Bridge 1000W 1500W 2100W 2400W N/A N/A
Input Sensitivity (4Ω, 1 kHz) 4 dBu
Input Impedance 30 kΩ Balanced/15 kΩ Unbalanced
Input CMRR (1 kHz) > 50 dB
Frequency Response (±0.5dB) 20Hz~20 kHz
AMP CLASS D
T.H.D (1 kHz, 1/3 Power) < 0.03%
Signal to Noise Ratio > 100 dB
Damping Factor (8 Ω, 400 Hz) > 200
Channel Separation (8 Ω, 1 kHz) > 700 dB
Integrated DSP Processing Crossover : Frequency Range ; 50Hz~3kHz, 24dB/oct
Filters : LowPass & HighPass ( both channels )
Limiter ( Channel independent clip limiter )
PEQ & Time Alignment
Power Supply Switching mode power supply
Power Source AC 100~240V,50/60Hz
Weight (Net) 4.9 kg 4.9 kg 5.2 kg 5.2 kg 5.9 kg 5.9 kg
Dimensions (W x H x D) 482 x 88 x 280
*Specifications and design subject to change without notice for improvements.
When state of the art amplifier technology is combined with a high quality switch mode power supply in a D class amplifier package, you get the higest audio resolution and efficiency. They are much more efficient than conventional amplifiers, they run cooler, lighter, and don't require massive heat sinks and heavy transformers.
This revolutionary ampifier offers the sonic superiority and great reliabiity, in an extremely efficient and lightweight design. Advanced protection circuitry allows operation with greater efficiency into any load condition, under a range of power conditions.
Thermal limiting circuitry ensures stable operation into loads as low as 2 ohms. This thermal limiting circuitry also ensures powerful sound even in extreme load conditions.
The light weight and simple to use built in features, as well as robust circuitry make the D-Deries amplifier range an obvious choice for mobile band and DJ rigs. The versatile features allow setup in virtually any system, without the need for adding extensive amounts external equipment.
d-series-detail-1.jpg
Processing Features
The D Series amplifiers include a number of integrated processing features
which appear on the front panel LCD screen.
MODES
* Stereo : In this mode, Channel 1 input signal goes to Channel 1 output, and Channel 2 input signal goes to Channel 2 output.
* INPUT Y : In this mode, the Channel 1 input signal is sent to the Channel 1 and Channel 2 output. The Channel 2 input signal is ignored.
* BRIDGE : In this mode, the power of both amplifier channels are delivered into a single Mono 8 or 4 ohm load.
FEATURES
* HPF : This filter reduces unwanted, potential energy-robbing low-end frequencies. Setting an appropriate high-pass filter frequency also helps protect the loudspeaker from damage. In this MENU, you can set roll-off frequency which are 40, 50, 63, 80, 100, 125Hz.
* LPF : The roll-off frequency can be set to 6.3K, 8K, 10K, 16K, or 20KHz to prevent un wanted high frequencys from passing to the speaker system.
* PEQ, 8BAND : An 8 band parametric EQ: 100Hz, 200Hz, 400Hz, 800Hz, 1.6KHz, 3.15KHz, 6.3KHz, 12.5KHz. Adjustable Q value and gain for boost and cut. Adjustable Q range is 0.5 ~ 5 by 0.5 step. Adjustable gain range is +/-6dB by 1dB step. Fine tuning your system has never been easier.
* LIMITER : provides your amplifier and system with higher performance and better protection. There is just one parameter of THRESHOLD for easy set up. You can set the threshold level to 0dB, -3dB, -6dB, -12dB.
* DELAY : Total dealy time is 20mS per channel. Adjustable step is that 0~3mS / 0.25mS step, 3~10mS / 1mS step and 10~20mS / 2mS step.
* X-OVER (INPUT Y MODE ONLY) : X-OVER system provides a variable state Linkwitz-Reley 24dB/oct filter allowing you to choose a point between 50Hz and 3.15KHz on 1/5th oct centers.The following points are 50Hz, 56Hz, 64Hz, 74Hz, 85Hz, 98Hz, 112Hz, 129Hz, 148Hz, 171Hz, 196Hz, 225Hz, 259Hz, 342Hz, 392Hz, 451Hz, 518Hz, 595Hz, 684Hz, 786Hz, 903Hz, 1.03KHz, 1.2KHz, 1.37KHz, 1.57KHz, 1.8KHz, 2.08KHz, 2.4KHz, 2.7KHz, 3.15KHz.
puis la série E ... j'ai pas trouvé grand chose sur cette série
lien PDF : http://www2.standardaudio.se/pdf/DATABLAD/HPA/Datablad%20HPA%20E3i%20E5i%20E7I%20EN.pdf
[ Dernière édition du message le 16/06/2015 à 21:19:19 ]
midriaze
5589
Modérateur·trice thématique
Membre depuis 18 ans
RJ64420
11
Nouvel·le AFfilié·e
Membre depuis 10 ans
- < Liste des sujets
- Charte