Crown XS700

• Fabricant : Crown
• Modèle : XS700
• Catégorie : Amplis de sono 2 canaux
• Fiche créée le : 11/08/2008

Power Output for Xs700:

• 2-ohm Dual (per ch.): 900W
• 4-ohm Dual (per ch.): 750W
• 8-ohm Dual (per ch.): 450W
• 4-ohm Bridge: 1900W
• 8-ohm Bridge: 1645W

Features:

• Housed in a rugged, all-steel 2U chassis
• Efficient forced-air fan prevents excessive thermal buildup
• 2-channel models have XLR-1/4" combo and Phoenix-style inputs, daisy-chain XLR outputs, touch-proof binding post outputs and Speakon outputs. Xs4300 has XLR-1/4" combo inputs and touch-proof binding post outputs
• Precision detented level controls, power switch, and eight LEDs which indicate signal and clip for each channel, power, AC mains, bridge mode, temperature and fault conditions
• Microprocessor-controlled protection system
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications:

• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
• Frequency Response (at 1 watt) 22 Hz to 22 kHz: ±1 dB
• Phase Response (degrees at 1 watt, 20 Hz to 20 kHz): +5°, –18°
• Signal-to-Noise Ratio: A-weighted, below rated power: > 102 dB; 22Hz to 22kHz, below rated power: > 97 dB
• Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 20 kHz: < 0.5%
• Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1): From full rated output to –40 dB: < 1%; From full rated output to –30 dB: < 0.5%
• Damping Factor (8 ohm) 10 Hz to 400 Hz: > 200
• Crosstalk at 1 kHz, 20 kHz (below rated power): > 65 dB, > 45 dB
• Voltage Gain (at maximum level setting): 47.4:1 (33.5 dB)
• AC Line Voltage and Frequency Configurations Available (±10%): 120VAC/60 Hz and 240VAC/50 Hz.

Indicators:

• Signal: Two or four green LEDs, one for each channel, illuminates when the channel's input signal level is above –40 dBu.
• Clip: Two or four front-panel red LEDs, one for each channel, illuminates when the channel's output signal is being overdriven.
• Power: Yellow front-panel LED indicates amplifier has been turned on and AC power is available.
• AC Mains: Red front-panel LED indicates the presence of AC power at the power cord, even if the amplifier is not turned on.
• Fault: Red front-panel LED illuminates whenamplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on.
• Bridge: Yellow LED indicates that amplifier is in bridge mode (Channels 1 and 2, Channels 3 and 4 in Xs4300).
• Temp: Red LED indicates that channel(s) are in thermal protect mode.

Construction:

• Ventilation: Flow-through ventilation from front to back.
• Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
• Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³).
• Dimensions: EIA Standard 19 inch (48.3 cm) rack mount width (EIA RS-310-B), 3.5 inch (8.9 cm) height and 17.14 inch (43.5 cm) depth behind the mounting surface.
• Weight: 28 lb 14 oz (13.1 kg).

Distribué par Freevox