Annonces CPS2.6
Alerte nouvelle annonceForums Electro-Voice CPS2.6
Images
Fiche technique
- Fabricant : Electro-Voice
- Modèle : CPS2.6
- Catégorie : Amplis de sono 2 canaux
- Fiche créée le : 11/08/2008
Poid | 14.8kg |
Profondeur | 421.5mm |
Largeur | 482.6mm (19") |
Hauteur | 88.1mm |
Amplifier Gain | 32dB |
Analog Inputs | 2, electronically balanced, Phoenix-type |
Audio Network | No |
CAN Bus Interface | Optional (RCM-810 card) |
Continuous Rated Power (1 kHz, THD 1%) 2Ω | 900Watts |
Continuous Rated Power (1 kHz, THD 1%) 4Ω | 600Watts |
Continuous Rated Power (1 kHz, THD 1%) 8Ω | 380Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 500Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 250Watts |
Cooling | Front-to-Rear, 3-stage fans |
Crossover Type | Optional Modules |
DIM 30 | 0.02% |
Electronics Type | Amplifier |
Frequency Response (-3 dB) | 10 Hz - 40 kHz (±1 dB) |
Impedance | 2/4/8Ω |
Input Impedance (Balanced) | 20kΩ |
Input Sensitivity | +3.1 dBu (1.11Vrms) |
Intermodulation Distortion (SMPTE) | 0.05% |
Mains Voltage | 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) |
Maximum Bridged Output 4Ω | 1800Watts |
Maximum Bridged Output 8Ω | 1200Watts |
Maximum Input Voltage | +21 dBu (8.69 Vrms) |
Network Control (IRIS-Net) | Optional |
Slew Rate | 26V/µs |
Topology | Class-AB |
Total Harmonic Distortion | 0.03% |
Variable Load Drive (VLD) | No |
Distribué par MSC Distribution
»
Manuels et autres fichiers
Autres catégories dans Amplis de puissance sono
Autres dénominations : cps2 6, cps26, cps 2 6