JBL 2206 H

• Fabricant : JBL
• Modèle : 2206 H
• Catégorie : Haut-parleurs à cône 12" (31 cm)
• Fiche créée le : 29/11/2009

La série LVGC™ regroupe des haut-parleurs basse fréquences de forte puissance. Ils intègrent la technologie Vented Gap Cooling pour un meilleur refroidissement et une structure d’aimant améliorée Symmetrical Field Geometry (SFG). Ceci permet d’optimiser la densité de flux pour diminuer la distorsion harmonique du haut parleur. En évitant ainsi l’utilisation de métaux rares, ces haut-parleurs offrent des performances élevées pour un coût mesuré. Nominal Diameter: 300 mm (12 in) Rated Impedance: 8 ohms Power Capacity1: 600 W continuous pink noise Sensitivity 2: 95 dB SPL, 1 W, 1 m (3.3 ft) Frequency Range3: 45 Hz 3.5 kHz. Power Compression4 at - 10 dB power (60 W): 0.6 dB at - 3 dB power (300 W): 2.4 dB at full power (600 W): 3.9 dB Distortions 2nd harmonic: < 1.0% 3rd harmonic: < 1.0% Highest Recommended Crossover: 1500 Hz Recommended Enclosure Volume: 28-113 1 (1-4 ft3) Effective Piston Diameter: 264 mm (10.4 in) Maximum Excursion Before Damage (p-p): 40 mm (1.6 in) Minimum Impedance: 6.9 ohms ± 10% @ 25°C (H) 12.2 ohms ± 10% @ 25°C (J) Voice Coil Diameter: 100 mm (4 in) Voice Coil Material: Edgewound aluminum ribbon Voice Coil Winding Depth: 19 mm (0.75 in) Magnetic Gap Depth: 8 mm (0.32 in) Magnetic Assembly Weight: 6.8 kg (15 lb) B1 Factor: 18.1 N/A(H) 24.8 N/A (J) Effective Moving Mass: 0.065 kg Positive voltage on BLACK terminal gives forward diaphragm motion. 1AES standard (60-600 Hz). 2Sensitivity is based on a swept 100 Hz to 500 Hz signal. 1 W is 2.83 V @ 8 ohms, 4.0 Vat 16 ohms. 3Frequency range is defined as the frequency extremes where the response is - 10 dB from the rated sensitivity. 4 Power compression is the sensitivity loss at the specified power, measured from 60 to 600 Hz, after a 5 minute AES standard (60-600 Hz) pink noise preconditioning test at the specified power. 5Distortion is measured at - 10 dB power, from 100-500 Hz. fs: 52 Hz Re: 5.3 ohms (H), 10.0 (J) Qts: 0.32 Qes: 0.34 Vas: 62 l(2.2 ft3) SD: 0.055 m2 (84.7 in2) Xmax: 7.5 mm (0.30 in) VD: 413 cm3 (25.4 ins) Le: 1.5 mH (H), 3.0 (J) ~0 (Half space)*: 2.5% Pe (Max)1: 600 W continuous pink noise Overall Diameter: 311 mm (12¼ in) Bolt Circle Diameter: 294 mm (11 9/16 in) Baffle Cutout Diameter Front mount or rear mount: 280 mm (11 1/16 in) Depth7: 127 mm (5 in) . , Volume Displaced by Driver: 41(0.15 ft3) Net Weight: 7.8 kg (17 1/8 lb) Shipping Weight: 8.4 kg (18½ lb) Distortion levels raised 20 dB, measured at 60 watts, 1 meter.

La série LVGC™ regroupe des haut-parleurs basse fréquences de forte puissance. Ils intègrent la technologie Vented Gap Cooling pour un meilleur refroidissement et une structure d’aimant améliorée

Symmetrical Field Geometry (SFG). Ceci permet d’optimiser la densité
de flux pour diminuer la distorsion harmonique du haut parleur. En évitant ainsi l’utilisation de métaux rares, ces haut-parleurs offrent des performances élevées pour un coût mesuré.

Nominal Diameter: 300 mm (12 in)
Rated Impedance: 8 ohms
Power Capacity1: 600 W continuous pink noise
Sensitivity 2: 95 dB SPL, 1 W, 1 m (3.3 ft)
Frequency Range3: 45 Hz 3.5 kHz.
Power Compression4
at - 10 dB power (60 W): 0.6 dB
at - 3 dB power (300 W): 2.4 dB
at full power (600 W): 3.9 dB
Distortions
2nd harmonic: < 1.0%
3rd harmonic: < 1.0%
Highest Recommended Crossover: 1500 Hz
Recommended Enclosure Volume: 28-113 1 (1-4 ft3)
Effective Piston Diameter: 264 mm (10.4 in)
Maximum Excursion Before
Damage (p-p): 40 mm (1.6 in)
Minimum Impedance: 6.9 ohms ± 10% @ 25°C (H)
12.2 ohms ± 10% @ 25°C (J)
Voice Coil Diameter: 100 mm (4 in)
Voice Coil Material: Edgewound aluminum ribbon
Voice Coil Winding Depth: 19 mm (0.75 in)
Magnetic Gap Depth: 8 mm (0.32 in)
Magnetic Assembly Weight: 6.8 kg (15 lb)
B1 Factor: 18.1 N/A(H)
24.8 N/A (J)
Effective Moving Mass: 0.065 kg
Positive voltage on BLACK terminal gives forward diaphragm motion.
1AES standard (60-600 Hz).
2Sensitivity is based on a swept 100 Hz to 500 Hz signal. 1 W is 2.83 V @ 8 ohms, 4.0 Vat 16 ohms.
3Frequency range is defined as the frequency extremes where the response is - 10 dB from the rated sensitivity.
4 Power compression is the sensitivity loss at the specified power, measured from 60 to 600 Hz, after a 5 minute AES
standard (60-600 Hz) pink noise preconditioning test at the specified power.
5Distortion is measured at - 10 dB power, from 100-500 Hz.

fs: 52 Hz
Re: 5.3 ohms (H), 10.0 (J)
Qts: 0.32
Qes: 0.34
Vas: 62 l(2.2 ft3)
SD: 0.055 m2 (84.7 in2)
Xmax: 7.5 mm (0.30 in)
VD: 413 cm3 (25.4 ins)
Le: 1.5 mH (H), 3.0 (J)
~0 (Half space)*: 2.5%
Pe (Max)1: 600 W continuous pink noise

Overall Diameter: 311 mm (12¼ in)
Bolt Circle Diameter: 294 mm (11 9/16 in)
Baffle Cutout Diameter
Front mount or rear mount: 280 mm (11 1/16 in)
Depth7: 127 mm (5 in) . ,
Volume Displaced by Driver: 41(0.15 ft3)
Net Weight: 7.8 kg (17 1/8 lb)
Shipping Weight: 8.4 kg (18½ lb)
Distortion levels raised 20 dB, measured at 60 watts, 1 meter.

Distribué par Freevox