Annonces Flex TP-850
Alerte nouvelle annonceImages
Avis
LE TOP POLYVALENT LEGER GRANDE SONORITER SON AU RENDEZ VOUS !!!
Publié le 30/01/15 à 03:35ET VRAIMENT DU HAUT NIVEAU VOUS SERREZ HEUREUX DE FAIRE UNE ECOUTE DE CE SYSTEME SON TPA
Fiche technique
- Fabricant : TPA
- Modèle : Flex TP-850
- Catégorie : Enceintes d'array
- Fiche créée le : 05/07/2013
The Flex TP-850 is a two-way line array element housing two 10”/3” VC LF neodymium cone drivers and a dendritic device on a 1.4” exit neodymium compression driver along with a passive crossover network, switchable passive or bia-mped. The 90-degree constant directivity horizontal dispersion pattern is maintained down to 350Hz, while the vertical HF dispersion of 15° allows the Flex TP-850's to be scalable when needed. The mechanical design of the cabinet enables vertical splay angles to be set at 0°, 4°, 7.5°, 12° and 15°, and two NL4 connectors wired in parallel are mounted on the real panel. The frequency pattern control of a flown hang of 6 Flex TP-850's can go down to 70Hz. The cabinet is equipped with multiple handles and constructed by 18-layer plywood and coated with water based painting for environmental purpose.
|
Type | Compact two-way line array element, switchable passive/bi-amp |
Frequency Response | 60Hz-20kHz±3dB,-10dB@ 55Hz |
Drivers | Two 10”/3” VC NEO cone driver; One 1.4” exit NEO compression driver |
Rated Power | 850 W(LF: 700 W/ HF: 150 W) |
Recommended Amplifier | 850-1700W into 4 ohms |
Sensitivity | 102 dB |
Maximun SPL | 132 dB continuous, 138dB peak |
Nominal Impedance | 8 ohms nominal |
Dispersion(-6dB) | 90°horizontal, 15°vertical |
Crossover | 1.8KHzPassive |
Finish | Textured black paint |
Protective Grille | Black perforated steel |
Connectors | 2×Neutrik speakon NL4 |
Fittings | Top hat fitting |
Dimensions(mm) | (W)850mm x (H)300mm x (D)415mm |
Weight | 35 kg |
Autres catégories dans Enceintes de sonorisation
Autres dénominations : flex tp 850, flextp 850, flextp850, flex tp850