Se connecter
Se connecter

ou
Créer un compte

ou
FR
EN

DPA Microphones d:fine In-Ear Broadcast Headset Microphone

Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos

Microphone serre-tête de la marque DPA Microphones appartenant à la série d:fine

Déposer un avis
Argus 485,00 €

Argus du DPA Microphones d:fine In-Ear Broadcast Headset Microphone

Avertissement

Attention, cette cote argus a plus de 6 mois.

Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Où acheter d:fine In-Ear Broadcast Headset Microphone ?
Moins
  • Neuf
  • Occasion
Aucun revendeur ne propose ce produit pour le moment.
Alerte disponibilité
Il n’y a pas de petite annonce pour ce produit.
Alerte nouvelle annonce
Argus 485,00 €

Fiche technique

  • Fabricant : DPA Microphones
  • Modèle : d:fine In-Ear Broadcast Headset Microphone
  • Série : d:fine
  • Catégorie : Microphones serre-tête
  • Autres dénominations : d fineinearbroadcastheadsetmicrophone, dfineinearbroadcastheadsetmicrophone, d fine in ear broadcast headset microph 1 , d fineinearbroadcastheadsetmicroph 1 , dfineinearbroadcastheadsetmicroph 1
In-Ear monitor and discrete microphone for broadcast available in single-end/single-in-ear, dual in-ear or dual mount/single-in-ear editions
Directional characteristics:  Omnidirectional
Principle of operation:  Pressure
Cartridge type:  Pre-polarized condenser
Frequency range:  20 Hz - 20 kHz
Frequency range, ± 2 dB::  20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz
Sensitivity, nominal, ± 3 dB at 1 kHz:  6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:  Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4:  Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):  Typ. 68 dB(A)
Total Harmonic Distortion (THD):  <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
Dynamic range:  Typ. 97 dB
Max. SPL, peak before clipping:  144 dB
Output impedance:  From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm.
Cable drive capability:  Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Output balance principle:  Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio (CMRR):  > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Power supply (for full performance):  Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4 V with DAD6001-BC XLR adapter.
Current consumption:  Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter.
Connector:  MicroDot
Color:  Black, beige, brown, lime
Weight:  Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).
Microphone head size (h x w x d):  9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in)
Capsule diameter:  5.4 mm (0.2 in)
Mic boom length:  110 mm (4.3 in)
Cable length:  1.3 m (4.3 ft)
Cable color:  Black, beige, brown
Cable diameter:  1.6 mm (0.06 in)
Polarity:  +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electro Magnetic Compatibility (EMC):  Fully compatible
Temperature range:  -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH):  Up to 90%
d:fine In-Ear Broadcast Headset (Specifications, In-Ear Drivers):  -
Type:  Dynamic earplug (acknowledged Hi-Fi plugs)
Connector:  3,5 mm stereo Mini-Jack.
Single In-Ear:  Signal at Mini-Jack Tip
Dual In-Ear:  Signal at Mini-Jack Tip (Left – mic boom side) and Ring (Right)
Sensitivity:  107 dB
Nominal impedance:  18 Ω
*:  2 sizes Ear-adapters are included

Distribué par Audio 2

»

News

Autres catégories dans Microphones filaires

Où acheter d:fine In-Ear Broadcast Headset Microphone ?
Moins
  • Neuf
  • Occasion
Aucun revendeur ne propose ce produit pour le moment.
Alerte disponibilité
Il n’y a pas de petite annonce pour ce produit.
Alerte nouvelle annonce
Argus 485,00 €

On en parle dans les forums...