Quid du "optional external Electro-Harmonix foot controller"

Citation : Foot Controller and Presets

If you plug the HOG’s external Foot Controller into the FOOTSWITCH phone jack, you will be able to store and load 6 presets. Use a normal
guitar cable to connect the Foot Controller to the HOG. Except for the INPUT GAIN slider, all sliders and settings on the HOG are saved in
the presets, including the position of the Expression Pedal, Exp. Button or MIDI Pitch Bend Wheel.

FOOTSWITCH Jack — Plug the HOG's Foot Controller into this jack using a standard 1/4" instrument cable.

Storing Presets — Set up a sound you like on the HOG. Then choose a preset button on the Foot Controller. Hold down the preset
button, its LED will blink for 3 seconds. When it stops blinking, release the footswitch, your preset has been stored.

Loading Presets — Tap a preset button on the Foot Controller once, the HOG will load the preset associated with that Footswitch.
When you load a preset that has an Expression Pedal value other than 0 or Toe-Up, it will load the Expression Pedal’s setting. In this case,
when the preset is loaded, the corresponding Expression Mode LED will blink rapidly, this tells you there is a pre-loaded Expression Setting.
If you want to reset the Expression Setting, press the EXP. BUTTON or press the EXP. MODE Switch, the LED blinking will stop.
Please note: If an Expression Pedal is plugged into the HOG while loading a preset, the Preset’s Expression Setting will not load.

Bypassing Presets — Pressing any of the Preset Footswitches on the Foot Controller will toggle the HOG between loading the selected preset and Bypass mode.