Taurus Stomp-Head 3.HG

• Fabricant : Taurus
• Modèle : Stomp-Head 3.HG
• Catégorie : Têtes d'ampli guitare à transistors
• Fiche créée le : 17/11/2017

The Stomp-Head 3.High Gain is an extremely light and small but still powerful and great sounding guitar amplifier. 

SH3.HG design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create great sounding, powerful, fully analog amplifiers with extremely light weight and very compact dimensions. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.

The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch.  CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer  Two additional foot switches are assigned to control  BOOST and MUTE functions.
            
SH-3.HG is equipped with power selector that allows to set 60Watt or 25Watt in STAGE MODE and 15Watt or 7Watt in STUDIO MODE. The amp is designed to work with 4, 8, and 16 ohm cabinets (Power Amp  adjust itself automatically  to speakers impedance)
The Stomp-Head can also be used as a guitar preamp, without connecting speaker cabinet.
The LINE OUT (with a Speaker Cabinet Simulation) allows connect the amplifier to a mixer or an external power amp. The Speaker Cabinet Simulation imitates sound of the 4 x12 CELESTION Vintage 30 cabinets. The amp is also equipped with a serial Effect Loop.  

LINE OUT with a speaker cabinet simulation allows the connection of the amplifier to a mixer or an external power amp. LINE OUT signal simulates the sound of the 4x12 CELESTION Vintage 30 cabinet. Device is also equipped with a serial effect loop.

• Power output:
  60W or 25W / 4ohm, 8ohm,16ohm in STAGE MODE
  15W or 7W / 4ohm, 8ohm,16ohm in STUDIO MODE
• Power stage efficiency: 130Watt
• Speakers impedance auto detection 
• Tubes: 12AX7
• 2 channels: CLEAN and LEAD
• 3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTE
• CHANNELS controls:  (CLEAN & LEAD):  GAIN, BASS, MIDDLE, MID-RANGE switch, TREBLE, PRESENCE, VOLUME and BOOST shared by both channels
• Input GAIN boost (switch +6dB)
• BOOST: immediate  access to two different volume levels
• Serial EFFECT LOOP
• LINE OUTPUT with speaker simulation
  The ability to send the linear signal  with or without simulation or both at the same time
  LINE OUTPUT with Speaker Simulation. Allows send linear signal with simulation (PIN) or without simulation (RING) or both simultaneously
  
• INPUT for external channel selector/controller
• HEADPHONES OUTPUT 
• AUX-INPUT allows connect an audio player or send monitor signal to the headphones. 
  The AUX  signal is send only to the headphones, bypassing  the speakers.
• MIX-MODE  both amps channels can be mixed and used simultaneously
• Power Output selector STAGE / STUDIO 
• Dimensions: [H x W x Dl] 90 x 270 x 205 mm
• Weight: 2.2kg