Budda MN100 Mark Nason Signature

General

• Power: 120W / 60W
• Number of channels: 3 (Clean, Rhythm and Lead)
• Controls:
• Front Panel
• Per Channel: Volume, Gain, Over-Boost, , Bass, Middle, Treble, Resonance, Presence knobs & Channel Select Button
• Common: Master Volume, Boost knobs
• Rear Panel:
• Per Channel / Effect Loop: Send Level, Loop Mix, Master/Channel
• Common: Speaker Outputs Impedance Selector (4/8/16 Ohms), Global Effect Loop (Parallel/Series), Power Level (Full/Half), Rectifier Type (Tube to Solid State), Level Slave Out
• Connectors:
• Inputs: 2 (High & Medium)
• Output: Slave Out
• Speaker Outputs: 2
• Effect Loops: x3 Send & Return (per channel)
• Preamp Out/Pwramp In: 
• Footswitch: 10-button multi-function footcontroller (included)
• MIDI: In, Out (MIDI: PC & CC - see manual)
• Tubes:
• Preamp: 7x 12AX7
• Rectifier: 2x 5U4 (can be replaced by 5A4 or GZ34 tubes)
• Poweramp: 4x EL34 (can be replaced by 6L6GC -plus KT66, KT88 5881 and 6CA7 with re-biasing)
• Dimensions (HxWxD): 11.5” (292 mm) x 28.25” (717 mm) x 11.25” (286 mm)
• Weight: 60.6 lbs (27.55 kg)

Technical Data

• Effects Send:
• Load impedance: 1k Ohms or greater
• Minimum Output: -32dBu, 0.02mV RMS (with –20dBu signal)
• Maximum Output: +1dBu, 1.6V RMS (with 0dBu signal)
• Unity gain with Send set at mid position, -10dB at min, +4dB at max.
• Effects Return:
• Impedance: 100k Ohms
• Minimum Input Sensitivity: -12dBu, 0.18mV RMS
• Maximum Input Sensitivity: +10dBu, 2.5V RMS
• Preamp In / Pwramp Out:
• Nominal output level: +4dBu, 1.2V RMS
• Load impedance: 1k Ohms or greater
• Minimum Input Sensitivity: 0dBu, 0.775V RMS (with Master on max)
• Maximum Input Sensitivity: +6dBu, 1.6V RMS (with Master on half)
• Input impedance: 250k Ohms
• Slave Out:
• Maximum output level: +22dBu, 10V RMS (at full power)
• Load impedance: 10k Ohms or greater