CG Products Add1

2 Precision adders/comparators each with 3 inputs suitable for audio and/or CV signals. The switch position decides which mode is selected. In ‚Σ‘ mode, the circuit functions as an adder with amplification = 1,00. By patching one signal to 2 or 3 inputs, amplification factors of ·2,00 or ·3,00 can be set.

In ‚Comp‘ mode, the circuit works as a comparator with a slightly schmitt-trigger-like characteristic. Depending on the level of the inputs, the output voltage is switched between either +5V or -5V, suitable as gate/trigger, squarewave/pulse audio signal etc. The threshold level of switching between these voltages is ≈0V; e.g. for an input sum signal > 0V, the output signal will be +5V, for an input sum < 0V it will be -5V. So, the threshold level can be shifted by applying an offset or control voltage on one of the inputs.
Applications such as pulse width modulation or +/- voltage detection can be easily realized.

• Audio signal mixing
• CV signal mixing
• High precision, suitable for frequency CVs
• Switchable comparator mode
• Signal-to-squarewave conversion
• Available with banana or 3,5mm minijacks
• Eurorack module
• Width: 6 HP
• Dimensions: 128,5 mm x 30,2 mm
• Depth: 30mm
• Supply voltage: ±12V
• Current consumption (postive rail, without load): ≈10mA