Made in China
Agathis body
C-shaped maple neck
Rosewood Fingerboard with 22 frets
P Bass split single coil
J Bass single coil
Pickup blend pot
1/4" output jack
UTILIZATION
Aimed at the budget or first time market, this MB4 bass from Squier is of decent quality. It gets a good sound for the price point, but the bass I owned had some minor neck problems out of the box. There were a couple of high frets, and this caused buzzing in some inconvenient locations. I made sure the bass was setup from a professional, but the buzzing didn't go away without some fret hammering work. That's not really a terribly big deal, but most people wouldn't know what to do to correct the problem. And it shouldn't have done that out of the box. Other than that issue, there were no problems. The neck played well after the setup and fretwork.
SOUNDS
The bass sounds good. It doesn't get a ton of different tones, but it does make some good ones. There is a good variety of timbres with use of the pickup blend pot. The P-Bass neck pickup had some good growl and warmth, and the J-Bass bridge pickup allowed me to get some good bright Jaco tones. Slapping especially sounded good on this bass, so it would be a nice funk riff bass.
OVERALL OPINION
Overall, it's ok. It would have garnered better reviews from me if the bass had come with a good fretjob from the factory, but I understand that the company is making a very low-cost instrument here, and fretwork labor is one of the first areas that many manufacturers cut. My bass might have just been a fluke on the fretwork, to be honest, but to anyone seriously interested in this bass, I'd recommend playing the actual instrument as opposed to just ordering online.
Fabriqué en Chine
Corps Agathis
Manche en érable en forme de C
Touche en palissandre avec 22 frettes
P Bass simple bobinage diviser
J Basse simple bobinage
Pot de mélange de ramassage
1 / 4 "jack de sortie
UTILISATION
Destinée au marché de budget ou de temps d'abord, cette basse Squier MB4 partir est d'une qualité décente. Il obtient un bon son pour le point de prix, mais la basse que je possédais eu quelques problèmes mineurs au cou hors de la boîte. Il y avait un couple de frettes élevé, et cela a causé des bourdonnements dans certains endroits gênants. Je me suis assuré de la basse a été installé par un professionnel, mais le bourdonnement n'a pas repartir sans une certaine frette travaux martelage. Ce n'est pas vraiment une bonne affaire terriblement grand, mais la plupart des gens ne sauraient pas quoi faire pour corriger le problème. Et il ne devrait pas avoir fait cela hors de la boîte. Autre que cette question, il n'y avait pas de problèmes. Le cou bien joué, après l'installation et l'ornementation.
SONORITÉS
La basse sonne bien. Il n'obtient pas une tonne de différents tons, mais il rend de bons. Il ya une bonne variété de timbres à l'utilisation du pot de mélange de ramassage. Le micro manche P-Bass eu quelques grognements bonne et la chaleur, et le micro chevalet J-Bass m'a permis d'obtenir quelques bons tons brillants Jaco. Botter en particulier sonnait bien sur cette basse, de sorte que ce serait une belle funk riff de basse.
AVIS GLOBAL
Dans l'ensemble, c'est correct. Il aurait valu mieux critiques de moi si la basse était venu avec une bonne fretjob de l'usine, mais je comprends que la compagnie fait un instrument très faible coût ici, et chantournage travail est l'un des premiers domaines que de nombreux fabricants coupé . Mon basses pourraient avoir été simplement un coup de chance sur le chantournage, pour être honnête, mais à toute personne sérieusement intéressée par cette basse, je vous recommandons de jouer l'instrument réel plutôt que de simplement commander en ligne.