Creation Audio Labs MW1

• Fabricant : Creation Audio Labs
• Modèle : MW1
• Catégorie : Boîtes de direct
• Fiche créée le : 16/02/2011

Instrument-level preamp to line-level balanced DI with reverse DI interface

The MW1 is the purest DI signal splitter you can insert into any signal chain without affecting the sound.  Combined with a great sounding reverse DI for re-recording and composite layering.

Why use a standard passive DI box which knocks your signal down to mic level, only to gain it back up (and the noise floor) with a mic pre?  To avoid noise and streamline the path, simply use the MW1 to boost your signal direct to line level! 

Features

• Instrument to line-level transparent, transformerless DI for clean tracking.

• Line to instrument-level reverse DI for reamp-recording or composite layering.

• Variable input and output impedance help match your original signal.

• Amplifier send with up to 30dB of transparent clean preamp boost.

• Tuner out with mute function for silent tuning or changing instruments.

• Polarity-reverse and ground-lift switches for common interfacing needs.

• Universal international power 85 to 260 VAC, 50 or 60Hz

Uses

• Make clean safety tracks of every take for more options when mixing.

• Reverse DI to reamp any take through various amps, profilers or FX pedals.

• Insert line level studio gear into your effects loop pedal chain.

• Insert effects loop pedal chains into you studio signal chain.

• Use exaggerated impedance settings to find new sounds.

• Double-track reamplification*.

Developed in cooperation with Michael Wagener, MW1 Studio Tool Real-Amping™ involves capturing clean safety tracks while recording, then re-recording those tracks through various amps, profilers, emulators and effects for composite layering or to replace the original amplifiers and effects if they no longer fit the mix. 

Use the variable input and output impedance controls to match the original sound of the track or find new and better sounds. Use your favorite studio compressors, EQs, etc. as effects in your pedal chain or use stomp boxes as an effects loop in your mixer.  

*Double-track reamplifying was pioneered by Barry Rudolph.  Means to reamp while simultaneously doubling the performance live on an additional track.  Explained in Mix Magazine, March 2008 review. Barry Rudolph is an L.A.-based recording engineer/mixer. Visit him online at www.barryrudolph.com