Argus du BAE Audio 10DCF
Attention, cette cote argus a plus de 6 mois.
Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Fiche technique
- Fabricant : BAE Audio
- Modèle : 10DCF
- Catégorie : Compresseurs de studio
- Autres dénominations : 10 dcf, 10dcf
- transformer coupled, all-discrete circuitry,
- bypass filter — with an inductor borrowed from the classic BAE 1073
- Marconi knobs, stepped switches for each control and a reverse analogue meter
- hand assembled in California using premium authentic analogue components.
Frequency Response
5Hz to 45kHz -1dB Measured at +8dBu
Noise
-80dBu with 200ohms source
Maximum Output Level
+33dBu into 10kΩ
+27dBU into 600Ω
Distortion
Varies from 0.03% to greater than 1%
Compressor
Threshold:
-20dBu to +16dBu with 2dB steps
Ratio:
1.5:1 to 10:1 with 6 position switch
Attack:
2mS to 80mS with 6 position switch
Recovery:
100, 200, 400, 800mS
Auto 1 100mS isolated peaks, 2 Sec prolonged levels
Auto 2 50mS isolated peaks, 5 Sec prolonged levels
Limiter
Threshold
+4dBu to +15dBu with 0.5 dB steps
Attack:
Slow 4mS, Fast 2mS
Recovery:
100, 200, 400, 800mS
Auto 1 100mS isolated peaks, 2 Sec prolonged levels
Auto 2 50mS isolated peaks, 5 Sec prolonged levels
Bypass Filter
50, 80,160 and 300 Hz
Gain Make-up:
0 to +20dBu in 1 dB steps
Output Impedance
100Ω Balanced earth free
Power Consumption
200mA at 24VDC
Dimensions in Inches
19W x 1.75L x 9D
Distribué par Studio Dealers
