Acheter neuf Rotosound Roto Electric
- Woodbrass En stock / Livré en 24h 5,50 €
- Thomann En stock / Livré en 48h 5,50 €
- Woodbrass En stock / Livré en 24h 5,90 €
- SonoVente En stock / Livré en 24h 5,90 €
- SonoVente En stock / Livré en 24h 5,90 €
Annonces Roto Electric
Alerte nouvelle annonceForums Rotosound Roto Electric
News
Images
Avis
3.0/5(2 avis)
50 %
50 %
Donner un avis
2010010Du chewing-gum !
Publié le 30/10/18 à 20:52J'ai acheté ces cordes "en urgence", parce qu'il me fallait un jeu aussitôt, et que le magasin le plus proche n'avait que ça, en 9-46, ma monte habituelle.
Les cordes ne sont pas agréables à jouer du tout. Elle s'écrasent sous les doigts, sont épaisses et trop rondes.
Le son obtenu est tout plat, sans relief, vide.
Une corde de Mi aigu est offerte, dans le paquet, mais je ne casse pas de cordes.
Vivement que ce jeu soit rincé, que je reprenne des cordes satisfaisantes (GHS ou Ernie).
Les cordes ne sont pas agréables à jouer du tout. Elle s'écrasent sous les doigts, sont épaisses et trop rondes.
Le son obtenu est tout plat, sans relief, vide.
Une corde de Mi aigu est offerte, dans le paquet, mais je ne casse pas de cordes.
Vivement que ce jeu soit rincé, que je reprenne des cordes satisfaisantes (GHS ou Ernie).
21
»
MountAnDewMeUne corde enroulée qualité de nickel
Publié le 29/07/12 à 04:30
(contenu en anglais) I have used numerous string brands over the years. I believe most instruments have string types that suit them best. The composition of the string along with the winding process do make a difference and one string that sounds great on one instrument might not do as well on a differently configured one. The thing I found most attractive about the Rotosound Yellows (10-46) was the consistency in production. Pack to pack the strings always seemed to perform as they are expected to. The sound is consistent and there are no variations in build which meant as long as I purchased them the intonation would stay consistent and need no adjusting.
These strings are priced fairly for a well constructed string using quality materials. There is nothing new or special about their design but they remain tried and true over the years. They do offer a two pack that will save you a little money, but the coolest thing about this company is that they understand guitarists and always package an extra high string along for the ride, great for us who bend and break a lot of those. If you fall into that category then these will provide an outstanding value.
I would categorize the sound quality of these strings with most nickel wound strings. They have a slightly warmer characteristic without sacrificing too much high end brightness. I primarily used them on a dual hum bucking Fender Stratocaster equipped with a Pearly Gates at the bridge and a '59 in the neck position. This was an odd American special issue guitar in the late '90s and tended to have a Les Paul type tone complimenting its Stratocaster build. After trying many material types then brands the Rotosound Yellows offered the best sound and reliability.
The only downside to these strings is that, like other nickel wound strings, they do tend to corrode faster and if not wiped off after use will come out of the case in poor condition. That being said these strings also start to sound bad when they are dirty and the brightness they did possess goes down hill fast. A good amount of string life expectancy is related to the type of materials used and in our ability to care for the product as well. All things being equal I do continue to use these strings but am always on the look out for a new and better product.
These strings are priced fairly for a well constructed string using quality materials. There is nothing new or special about their design but they remain tried and true over the years. They do offer a two pack that will save you a little money, but the coolest thing about this company is that they understand guitarists and always package an extra high string along for the ride, great for us who bend and break a lot of those. If you fall into that category then these will provide an outstanding value.
I would categorize the sound quality of these strings with most nickel wound strings. They have a slightly warmer characteristic without sacrificing too much high end brightness. I primarily used them on a dual hum bucking Fender Stratocaster equipped with a Pearly Gates at the bridge and a '59 in the neck position. This was an odd American special issue guitar in the late '90s and tended to have a Les Paul type tone complimenting its Stratocaster build. After trying many material types then brands the Rotosound Yellows offered the best sound and reliability.
The only downside to these strings is that, like other nickel wound strings, they do tend to corrode faster and if not wiped off after use will come out of the case in poor condition. That being said these strings also start to sound bad when they are dirty and the brightness they did possess goes down hill fast. A good amount of string life expectancy is related to the type of materials used and in our ability to care for the product as well. All things being equal I do continue to use these strings but am always on the look out for a new and better product.
20
»
Fiche technique
- Fabricant : Rotosound
- Modèle : Roto Electric
- Catégorie : Cordes guitare
- Poids du colis : 28 g
- Fiche créée le : 28/08/2012
Nous n'avons pas de fiche technique sur ce produit
mais votre aide est la bienvenue
Distribué par Filling Distribution
»
Autres catégories dans Accessoires & consommables pour guitare
Autres dénominations : rotoelectric