Annonces Mx-312
Alerte nouvelle annonceAvis
SynnicPublié le 06/09/14 à 02:46
(contenu en anglais)
(contenu en anglais)The Multivox MX-312 is a vintage, solidstate tape echo unit. It also has a spring reverb unit in it. It has connections for various audio levels at both input and output. It is a vintage device, so there is not PC connectivity.
UTILIZATION
The manual is reasonably well done and includes a block diagram of the unit. All controls are explained, some better than others. Configuration of the device is simple and the controls provide a wide variety of sounds.
SOUND QUALITY
I have used this device with guitar and keyboard to good effect. With proper care and maintenance the sound quality is quite good. The spring reverb in the unit is fairly subtle, so don't expect large alterations in sound from it. The tape echo effects are quite variable and can be set anywhere from subtle to "Oh my, really?" Replacing the endless tape loop is a bit painful as they are no longer available and you must find heavy duty 1/4 inch tape and cut and splice your own loop. I highly recommend having an Editall S-2 splicing block if you can find one.
OVERALL OPINION
This unit is pure analog goodness. There are things you can do with it that I have, so far, never seen a good software emulation of. On the downside, it does require maintenance and replacing the tape loop is a bit painful. This is my first vintage tape echo unit. I have not had an opportunity to try other tape echoes. Since I got this at the local pawn shop, my price/value was quite good. Yes, I would by this again. The sound quality is good and the unit is solidly built.
UTILIZATION
The manual is reasonably well done and includes a block diagram of the unit. All controls are explained, some better than others. Configuration of the device is simple and the controls provide a wide variety of sounds.
SOUND QUALITY
I have used this device with guitar and keyboard to good effect. With proper care and maintenance the sound quality is quite good. The spring reverb in the unit is fairly subtle, so don't expect large alterations in sound from it. The tape echo effects are quite variable and can be set anywhere from subtle to "Oh my, really?" Replacing the endless tape loop is a bit painful as they are no longer available and you must find heavy duty 1/4 inch tape and cut and splice your own loop. I highly recommend having an Editall S-2 splicing block if you can find one.
OVERALL OPINION
This unit is pure analog goodness. There are things you can do with it that I have, so far, never seen a good software emulation of. On the downside, it does require maintenance and replacing the tape loop is a bit painful. This is my first vintage tape echo unit. I have not had an opportunity to try other tape echoes. Since I got this at the local pawn shop, my price/value was quite good. Yes, I would by this again. The sound quality is good and the unit is solidly built.
00
»
Fiche technique
- Fabricant : Multivox
- Modèle : Mx-312
- Catégorie : Delay / échos
- Fiche créée le : 12/10/2010
From the manual:
Features
- The MX-312 MULTI ECHO is a matchless echo chamber of uncompromising quality and unequaled capacity. It produces among its many fascinating sounds, a wide variety of Echo, Reverb, Repeat Echo, Echo/Reverb, Repeat Echo/Reverb, Sound on Sound and the totally unique Swell Reverb effects.
- Two distinct types of Sound on Sound effects are produced through MX-312. SINGLE is used for playback and play along, timed at 18 to 36 seconds of recorded time according to setting of delay time control. PLURAL is used for multiple recording as it is played along.
- Because the Multivox MX-312 uses a free-running endless tape computer type dumping system utilizing large double pinch rollers and roller type guides, wow and flutter is kept below 0.15% and tape life is greatly extended.
- A 3-position slide switch is provided for each input and output channel to match level and impedance for instruments, microphones, and amplifiers.
Specifications
| Type | Solidstate, free running computer type, tape dumping system utilizing a 16 feet endless tape |
| Semiconductors | 10 IC's, 5 Transistors, 7 Diodes |
| Heads | Recording (1), Playback (4), Erase (1) |
| Motor | F. G. Servo Motor |
| Tape Speed | 12 cm/sec. - 24 cm/sec. |
| Tape Guides | Roller type (magnetic side of tape) (4), stationary (back side of tape) (1) |
| Auto Tape Forwarding System | Large double pinch rollers for feed and takeup |
| Delay Time | 100mS - 800mS |
| Wow & Flutter | Under 0.15% |
| Controls |
|
| Input Jacks |
|
| Output Jacks |
|
| Foot Switch Jacks |
|
| Fuse Holder | UL Type (0.5A fuse) |
| Power Consumption | 30 Watts |
| Physical Dimensions | 6-1/8(H) x 17(W) x 12(D) in. |
| Shipping Weight | 23 lbs. |
| Accessories | Owners Guide (1), Cleaning Ribbon (1), Spare Endless Tape MT-1 (1), Foot Switch MFS-1 (1), Connecting Cords (2). |
»
Autres catégories dans Processeurs d'effets
Autres dénominations : mx 312, mx312