Novation au superbooth deux nouveaux produits

The Novation Peak is an eight voiced polyphonic synth. There are three New Oxford oscillators for each voice which utilises two waveform generating techniques and 17 digital wavetables.

The unit features pre and post filter distortion for each voice, as well as a global distortion for the whole synth. Other effects include reverb, delay and chorus and there's also an arpeggiator built in.

There's a fantastic modulation system which offers a 16 slot modulation matrix as well as 16 directly assignable controls on the front panel. There's also the option to connect to other modular systems through the CV modulation input.

The design is perfect if you're looking for a desktop unit and an there's also an optional die-cast aluminium stand than can be purchased separately.

Novation Product Overview

Peak is an eight-voice desktop polyphonic synthesiser with three New Oxford Oscillators for each voice. The oscillators sound completely analogue by being high-quality NCOs (Numerically-Controlled Oscillators), but gain the flexibility of the digital domain with 17 digital wavetables. They can also become a linear FM source using either the analogue-sounding NCOs or digital wavetables – so are able to cross-modulate in a recursive loop.

The synth has a resonant multi-mode analogue filter for each voice, and three distortion points for each voice – pre-filter, post-filter and global – in an analogue signal chain. Peak is capable of receiving polyphonic aftertouch, which puts expression right at your fingertips. Reverb, delay and chorus effects are at one's disposal, and there is also an on-board arpeggiator.

The modulation system puts a 16-slot modulation matrix and 16 direct assignments in the main controls, cleverly arranged for intuitive patch design and sound editing. There are three ADSR envelopes and two LFOs for each voice, and more elaborate movements and secondary ‘via’ assignments are made just a few menu button presses away. In addition, two animate buttons give live performers instant one-touch transformation of patches.

Peak connects to modular systems via a CV modulation input, and has MIDI I/O on five-pin DIN ports, so other MIDI gear can be connected. Via USB, Peak can be plugged into Mac or PC, where unlimited patches can be kept using the Components software.

• Innovative New Oxford Oscillators using two waveform generating techniques: NCOs (Numerically-Controlled Oscillators) and 17 digital wavetables
• Pre-filter and post-filter distortion per voice, plus global distortion. Polyphonic aftertouch and linear FM. High-quality reverb, delay and chorus effects, and onboard arpeggiator
• Extensive modulation system, with 16-slot modulation matrix and 16 direct assignments controlled on the front panel. Three ADSR envelopes and two LFOs per voice, plus animate buttons
• CV modulation input for integration with modular systems
• Compact desktop module design with optional die-cast aluminium stand for positioning (not included)

Circuit Mono Station is a next-generation sequenced monosynth that originates from the Bass Station II, with three sequencer tracks that benefit from the 32 velocity-sensitive RGB pads found on Circuit.

The synth has two oscillators, three distortion modes, plus one multi-mode filter with high-pass, low-pass or band-pass. With Circuit Mono Station, the sync and tuning parameters of its two oscillators can be individually controlled. It also offers four waveshapes (sawtooth, triangle, square and sample + hold), a sub-oscillator, ring modulation and noise generation. Users can get the frequency band they want by applying high-pass, low-pass and band-pass filters with slopes of 12dB and 24dB.

In addition, Circuit Mono Station introduces a powerful overdrive. Both monophonic and paraphonic modes are available, with each oscillator individually controlled by its own sequencer. There are three sequencer tracks: two oscillator sequencers and one modulation sequencer. Users can alter Gate length, switch patterns instantly, choose sync rate and mutate patterns.

A four-by-eight modulation matrix makes it possible to route from LFO with four waveshapes, envelope, sequencer or velocity, enabling complex modulation for pitch, pulse-width, amp, filter, distortion or CV. Up to 64 patches can be loaded and saved on the device, right at the user's fingertips. Circuit Mono Station controls separate hardware via CV, Gate and modulation outputs, and has MIDI In, Out and Thru, so other MIDI gear can be connected. Via USB, Circuit Mono Station can be plugged into Mac or PC, where unlimited patches can be managed using Components.

Two oscillators with individual control of sync and tuning parameters
High-pass, low-pass and band-pass filters with slopes of 12dB and 24dB
Three distortion modes
Choose monophonic or paraphonic modes with individual glide control
Four-by-eight modulation matrix that enables complex alteration and routing
Load and save up to 64 patches on the device
Three sequencer tracks (two oscillator sequencers, one modulation sequencer)
32 velocity-sensitive RGB pads
16 scale types
Changeable sync rates
CV/Gate, CV mod plus MIDI In, Out and Thru for connecting and controlling separate hardware
Backup patches and sessions with Components