Phonicbloom Siluria

Siluria is polyphonic, multi-timbral synthesizer with a few classic effects. It is fully controllable via MIDI, and can act as a MIDI controller too. In addition to built-in sound engines, external signal can be processed by effects, or used as a modulation source. There are three audio input streams to choose from: FM radio, line-in and WAV files imported through the SD card.

Among the connectors at the back side you can find a USB-C supply port for power and data transfer, to download recorded WAV files or install firmware updates. When plugged into a computer, the unit appears as a mass storage disk.

There are also six 3.5mm Jack connectors: audio In & Out, MIDI In & Out, a separate output from the FM Radio (unprocessed signal), and an external antenna connector. There is a built-in half wavelength antenna, but if it's not enough, you can add a longer one.

A small white OLED display, located in the side panel above the connectors, will help you to navigate the settings, such as FM radio tuning, volume levels, or MIDI configuration.

Inside there is a powerful dual-core RISC-V processor ticking at 1GHz, with 512MB memory, and a Hi-Fi audio codec running at 48,000Hz sampling rate.