Annonces Coreblade
Alerte nouvelle annonceForums Hughes & Kettner Coreblade
News
Images
Avis
4.0/5(1 avis)
100 %
Donner un avis
iamqmanLame de ton coeur
Publié le 12/07/11 à 22:42
(contenu en anglais)This is by far one of the most versatile tube amp in the world. This amp is such an interesting feat of technology that it still amazes me as I'm writing this. This amp has a midi support built inside that takes 128 user presets. This is much like a midi foot controller that you would have on your floor in front of you during the gig. It also has a USB drive to use to change presets via your computer and slip them back into the amp. Next it has the ability to take either El34 power tubes or 6l6 power tubes. Then finally, it has what is acronym TSC, which is a features that detects tube failure and shuts off that tube from the circuit. A fantastic feat of technology that remains all tube tone and no modeling.
UTILIZATION
Channels Clean, Drive, Ultra I, Ultra II
Power 100 Watts
Poweramp Shipped with 4x EL34, but also 6L6GC applicables
Preamp 3x 12AX7
Modeling No
Effects 3 independant Digital-FX processors: Reverb, Delay, Modulation (Chorus, Flanger, Phaser, Tremolo)
Effects Loop serial/parallel
MIDI built in
Footswitch/Stageboard MIDI-Board FSM-432 MKII included
Switching Functions 4xPreset, Bank up, Bank down, Tap Delay
Special Features All Controls are fully programmable; Adjustable Noisegate; USB-Backup; Tube Safety Control (TSC)
Presets 128 user presets
Speaker Outputs 1x 4 Ohms or 2 x 8 Ohms; 1x 8 Ohms or 2x 16 Ohms; 1x 16 Ohms
Suggested Speaker Cabinet MC 412 CL
Dimensions 742 x 270 x 254 mm
Weight 18,2 kg/40,12 lbs
SOUNDS
This amp also has some effects build right into it. You have the option of some delay, chorus, flanger, phaser, and tremolo and also some added reverb to help color your tone a little bit. You also have a button on the front of the control panel that allows you to click in the effects loop and then even more versatility by clicking in the serial effects loop.
The tone of this amp is monstrous. You have four channels one for clean and the other three for gain. You have a drive channel and then an ultra channel and then a mega ultra channel. The distortion is so over the top but also very usable. You have more than enough gain ofr any style of music. But I guess the idea is to put more in there so no one would complain about not having enough. Even though too much sounds like garbage in a band setting.
OVERALL OPINION
At new you can find these amps for right around $2499, which isn't too bad for a four channel amp with load of features and options. This is the kind of amp that gets a lot of praise from some people and criticism from others. It is modern amp for technology and amp that features some nice usable options. I would recommend this amp to a metal or hard rock player who wants everything in one convenient package. You have effects and storage for covers songs if you do that. This is a gigging musicians dream amp.
UTILIZATION
Channels Clean, Drive, Ultra I, Ultra II
Power 100 Watts
Poweramp Shipped with 4x EL34, but also 6L6GC applicables
Preamp 3x 12AX7
Modeling No
Effects 3 independant Digital-FX processors: Reverb, Delay, Modulation (Chorus, Flanger, Phaser, Tremolo)
Effects Loop serial/parallel
MIDI built in
Footswitch/Stageboard MIDI-Board FSM-432 MKII included
Switching Functions 4xPreset, Bank up, Bank down, Tap Delay
Special Features All Controls are fully programmable; Adjustable Noisegate; USB-Backup; Tube Safety Control (TSC)
Presets 128 user presets
Speaker Outputs 1x 4 Ohms or 2 x 8 Ohms; 1x 8 Ohms or 2x 16 Ohms; 1x 16 Ohms
Suggested Speaker Cabinet MC 412 CL
Dimensions 742 x 270 x 254 mm
Weight 18,2 kg/40,12 lbs
SOUNDS
This amp also has some effects build right into it. You have the option of some delay, chorus, flanger, phaser, and tremolo and also some added reverb to help color your tone a little bit. You also have a button on the front of the control panel that allows you to click in the effects loop and then even more versatility by clicking in the serial effects loop.
The tone of this amp is monstrous. You have four channels one for clean and the other three for gain. You have a drive channel and then an ultra channel and then a mega ultra channel. The distortion is so over the top but also very usable. You have more than enough gain ofr any style of music. But I guess the idea is to put more in there so no one would complain about not having enough. Even though too much sounds like garbage in a band setting.
OVERALL OPINION
At new you can find these amps for right around $2499, which isn't too bad for a four channel amp with load of features and options. This is the kind of amp that gets a lot of praise from some people and criticism from others. It is modern amp for technology and amp that features some nice usable options. I would recommend this amp to a metal or hard rock player who wants everything in one convenient package. You have effects and storage for covers songs if you do that. This is a gigging musicians dream amp.
11
»
Fiche technique
- Fabricant : Hughes & Kettner
- Modèle : Coreblade
- Série : Coreblade
- Catégorie : Têtes d'ampli guitare tout lampe
- Fiche créée le : 25/09/2009
| CHANNELS | Clean, Drive, Ultra 1, Ultra 2 |
| POWER | 100 Watts |
| POWER AMP | 4 x EL34 |
| PREAMP | 3 x 12AX7 |
| TSC | Ja |
| EFFECTS LOOP | Serial/parallel, switchable |
| REVERB | Digital Spring Reverb |
| MULTI-FX | Tap-Delay, Modulation (Chorus, Flanger, Phaser, Tremolo) |
| MIDI | In, Out/Thru |
| FOOTSWITCH | FSM-432 MK II (included) |
| SWITCHING FUNCTIONS | Presets |
| SPECIAL FEATURES | PRN pots, Noise Gate, USB-Memory Slot |
| SPEAKER OUTPUTS | 1 x 4 / 2 x 8 Ω, 1x 8 / 2 x 16 Ω, 1 x 16 Ω |
| DIMENSIONS | 750 x 270 x 255 mm |
| WEIGHT | 18,2 kg |
Distribué par Camac - La boîte noire
»
