Raezer's Edge Audio Flux Stereo FRFR

A true Stereo FRFR Active Modeling Cabinet designed for use with current modelers and profilers. 

The Audio Flux provides a perfect STEREO platform and reflects your tones with true authenticity and unparalleled clarity. With dual independent volume controls and independent line outs for both channels.

Available as 2×10 or 2×12 combos hand built using Baltic Birch ply. Loaded with Eminence Full-range Neodymium Pro audio speakers in the 10″ and 12″ models.

All models are now also equipped with piezo electric tweeters. Available without tweeters on request.

Features and Technical Specs

• Removable back panel allows players to change tonality between open back or closed back cabinet.
• Independent volume controls with stereo/mono switch
• Discrete analog preamp sections
• Class D output section conforming with UL, IEC, EN and CSA standards
• Short circuit protection
• Over Temp protection
• Universal Mains input 100vac to 230vac 50 or 60hz
• Minimum load impedance 3.5 ohms
• Power Output: 2x150w / 4 ohms
• 2x120w / 8 ohms
• <1% THD
• .005% THD @ 1khz, 10w, 4 ohm
• 10-20khz freq response +/- 3 db 5w/4ohms
• output noise floor 126uv 20hz to 20khz unweighted