Bozak AR-4
- Mon ancien matos
- Mon matos actuel
- Mon futur matos
Argus du Bozak AR-4
Attention, cette cote argus a plus de 6 mois.
Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Fiche technique
- Fabricant : Bozak
- Modèle : AR-4
- Catégorie : Consoles DJ 4 voies et plus
- Autres dénominations : ar4
3-band Channel Isolator with 12dB per octave slopes:
Mid/Treble 4KHz
Bass/Mid 400Hz
3-band Master Isolator with 18dB per octave slopes:
Mid/High 5KHz
Low/Mid 300Hz
Connections:
Line and Phono Inputs Gold plated RCA
Microphone inputs Balanced 3 pin Gold Neutrik XLR
Line Outputs Gold plated RCA
Balanced Line Outputs Balanced 3 pin Gold Neutrik XLR
Master Loop Send & Return ¼” 3 pin switched jacks
Headphones ¼” 3 pin jack
Ground post 1x thumb screw chrome binding posts
Power Supply Worldwide 100-250v AC 50/60hz
Dimensions 100mm (h) x 350mm (w) x 370mm (d)
- Based on the original Bozak CMA-10-2D Discrete analogue design topology
- Intuitive DJ layout for uncluttered operation
- Massive headroom and unrivalled gain structure
- 4-direct input channels
- Channels 1 -3 fitted with Bozak RIAA Pre-amps
- Channel 4 fitted with Bozak Mic Pre-amp
- 3-Band Isolator on each channel with full cut and +8dB
- All channels can be selected for line level
- Balanced microphone input
- Flexible push button cueing with backlit switches
- Headphone Cue-Program mix control
- Massive 3w headphone output with backlit jack socket
- 3-Band Master Isolator with full cut and +8dB
- Dedicated Booth and Master controls
- Twin backlit analogue VU Meters with Peak LED
- VU meter switchable between Master and Cue
- Angled VU meters for better visibility
- Master stereo loop TRS 1/4″ jacks for Send & Return for adding EFX
- Quality Gold RCA and Neutrik XLR connectors
- Audio grade custom worldwide external power supply in custom housing
- Anodic printed front panel, text will not wear off
- Lightweight black anodised chassis
- Removable hardwood side trims
- Large ground post for turntable earth connection
- Bozak custom tooled knobs for improved hands on expierience
- Sits perfectly between SL1200s or CDJs, same foot print as CDJ-2000
- 350mm wide (320mm without wood trims) x 370 deep x 100mm high
