Fiche technique
- Fabricant : TC Electronic
- Modèle : Clarity X
- Catégorie : Contrôleurs de monitoring
- Autres dénominations : clarityx
multi-format monitor controller for use with any professional speakers, with MADI option
| Frame Configuration | Clarity X with Clarity X 5.1/7.1 remote control and 3600A Reference Microphone |
| Clarity X + MADI option. With Clarity X 5.1/7.1 remote control and 3600A Reference Microphone | |
| Clarity X + SDI option. With Clarity X 5.1/7.1 remote control and 3600A Reference Microphone | |
| Front Indicators/Control | Status LED: Runnnig, Net, Remote and Sync. IP address reset button. |
| Finish | Black anodized aluminum face plate. Plated steel chassis |
| Dimensions | 19 x 1.75 x 13.2 inches (483 x 44 x 334 mm), 1 RU |
| Weight | 9.0 lbs. (4.7 kg) |
| Mains Voltage | 100 to 240 VAC, 50 to 60 Hz auto-select |
| Fan | High quality fan |
| Power Consumption | 20 W typ |
| Warranty, Parts and Labor | 2 years |
| EMC | |
| Complies with | EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B |
| Safety | |
| Certified to | IEC 60065, EN 60065, UL 6500 and CSA E65 |
| Environment | |
| Operating Temperature | 32° F to 122° F (0° C to 50° C) |
| Storage Temperature | -22° F to 167° F (-30° C to 70° C) |
| Humidity | Max. 90 % non-condensing |
| Control interface | |
| GPI, Control Inputs (D-SUB) | 4 multi-state, multi-function. 0 V to 3.3 V DC sensing |
| GPO Output (D-SUB) | GPO output (D-SUB) |
| Output Voltage (D-SUB) | 3.3 V DC, 100 mA current limited |
| Ethernet and TC Icon Remote Control | 2 ports, RJ45, 10/100 Mbits/s, Base-T, SNMP-enabled |
| Clarity X 5.1/7.1 Remote Control | RJ45 connector |
| Clarity X 5.1/7.1 Remote Control | |
| Controls | 12 buttons with LEDs, 1 "Valid" LED, 1 high-end potentiometer |
| Finish | Black anodized aluminum face plate. Glass blasted anodized chassis |
| Dimensions | 4.8 x 3.0 x 1.9 inches (122 x 77 x 48 mm) |
| Weight | 0.7 lbs. (0.3 kg) |
| General Processing | |
| Number of Meters | 2 x LM8 Loudness Radar Meters, 2 x True-peak Meters, SPL Meter, Dose Meter, Stereo Deviation Meter, Center Ratio Meter |
| Input Audio Format | 2.0, 5.1, 7.1 |
| Output Speakerset Configuration | Stereo + 0 to 2 Subs, 5 ch Surround + 0 to 2 Subs, 7 ch Surround + 0 or 1 Sub |
| Number of Audio Channels Processed | 8 in, 8 out |
| Audio Processing Delay | 100 samples, 2.08 ms @ 48 kHz (digital in to digital out) |
| Adjustable On-line Delay | 0 - 1000 msec. Unit: ms, frames 24, 25, 30, 50, 50. Resolution: 1 ms or 0.1 frames |
| Adjustable Per-Speaker Delay | 0 - 100 msec. Resolution: 10 usec |
| Speaker Calibration Standard | EBU R128, SMPTE RP200, ATSC A85 |
| Total Speaker Calibration Precision | +/- 0.5 dB |
| Inter-speaker-channel Calibration Precision | +/- 0.05 dB |
| SPL measurement | 40 to 130 dB(A) SPL |
| Frequency Response DIO | DC to 23.9 kHz +/- 0.01 dB |
| Audio Processing Resolution | 40 bit precision, bit transparent |
| Internal Sample Rates | 44.1, 48 kHz |
| Internal Clock Precision | +/- 30 PPM |
| External Sample Rates | Same as internal +/-1.5 % |
| Interface Function | Synchronous, bit transparent |
| Digital IO Engine | TC developed DICE™ core |
| Jitter Rejection Engine | Upgraded JET™ technology. Based on System 6000 |
| Jitter Tolerance (input) | > AES3-2009 (master and slave input) |
| Jitter Rejection Low-Pass Filter | < -3 dB @ 10 Hz, < -100 dB @ 600 Hz, 4th order |
| Jitter Gain (in-to-out) | < 1 dB |
| Output Jitter (@ clean source) | < 1 ns peak, BW : 700 Hz to 100 kHz |
| AES Input / Output | |
| Connectors | D-SUB-25 incl. cable for XLR, 110 Ohm, Yamaha pinout, M2.6mm thread |
| Number of Channels | 16 in, 16 out |
| Formats Supported | AES/EBU (24 bit), AES3 |
| Status Bits | In: Accepts all, Out: Pro-status bits |
| Complies with Standards | AES3-2009 |
| Digital Output Phase | < 0.5 % of sample period |
| Input Variation Before Sample Slip | ±49.9 % of sample period |
| Input Signal Tolerance | 0.2 to 7 Vpp |
| Output Signal Level | 3.3 Vpp ±20 %, terminated |
| TOS / ADAT Input | |
| Format | AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958, EIAJ |
| Type | Optical (Tos-link), ADAT Lite pipe |
| Number of Channels | 2 Tos-link, 8 ADAT (44.1, 48 kHz), 4 SMUX ADAT (44.1, 48 kHz) |
| Input Variation Before Sample Slip | ±49.9 % of sample period |
| Analog Output | |
| Connectors | D-SUB-25, Yamaha/Tascam pinout, M2.6mm thread |
| Number of Channels | 8 out |
| Format | Ground sensing design |
| Ouput Impedance | 20 Ohm |
| Full Scale Output Level @ 0 dBFS | +12 dBu max, with analog -18 dB DIM |
| Dynamic Range | > 121 dB (incl. -18 dB DIM), unweighted, BW 20-20kHz |
| THD+N | < -99 dB @ 1 kHz, -3 dBFS (@ +12dBu), < -96 dB @ 1 kHz, -3 dBFS (@ -18 dB DIM) |
| Freq Responce | 20 Hz to 20 kHz, +0/-0.2 dB |
| Crosstalk | < -102 dB, 20 Hz to 20 kHz |
| D to A Conversion | 24 bit, 128 x Oversampling Bitstream |
| D to A Delay | 21 samples, 0.44 ms @ 48 kHz |
| Headphones Output | |
| Connectors | 1/4" Phone Jack (stereo) |
| Format | High drive, Impedance Compensating, Short circuit protected |
| Output Impedance | 3.4 Ohm |
| Headphones Impedance | 8 to 600 Ohm |
| Full Scale Output Level @ 0 dBFS | +21.5, +17.5, +12.5, +6.5 dBu (different headphones impedance settings) |
| THD+N | < -93 dB @ 1 kHz, -3 dBFS, 275 Ohm load (">275 Ohm" headphones impedance setting) |
| < -86 dB @ 1 kHz, -3 dBFS, 50 Ohm load ("50 to 300 Ohm" headphones impedance setting) | |
| < -86 dB @ 1 kHz, -3 dBFS, 25 Ohm load ("25 to 100 Ohm" headphones impedance setting) | |
| < -75 dB @ 1 kHz, -3 dBFS, 8 Ohm load ("8 to 50 Ohm" headphones impedance setting) | |
| Dynamic Range | > 109 dB, unweighted, BW 20 to 20kHz (all headphones impedance settings) |
| Freq. Response | +0/-0.2 dB, 20 Hz to 20 kHz |
| Crosstalk | < -102 dB, 20 Hz to 20 kHz |
| Power | 112 mW @ 600 Ohm load (">275 Ohm" headphones impedance setting) |
| 263 mW @ 32 Ohm load ("25 to 100 Ohm" headphones impedance setting) | |
| D to A Conversion | 24 bit, 128 x Oversampling Bitstream |
| D to A Delay | 21 samples, 0.44 ms @ 48 kHz |
| Aux Input | |
| Connectors | 1/8" Phone Jack (unbalanced, stereo) |
| Input Impedance | 500 Ohm |
| Full Scale Input Level @ 0 dBFS | +5 dBu |
| THD+N | < -98 dB @ 1 kHz, -3 dBFS |
| Dynamic Range | > 105 dB, unweighted, BW 20 to 20kHz |
| Freq. Response | +0/-0.1 dB, 20 Hz to 20 kHz |
| Crosstalk | < -75 dB, 20 Hz to 20 kHz |
| A to D Conversion | 24 bit, 128 x Oversampling Bitstream |
| A to D Delay | 29 samples, 0.60 ms @ 48 kHz |
| Calibrated Microphone and Microphone Input | |
| Model Number | TC Electronic, 3600A Reference Microphone. Microphone holder included (5/8" and 3/8") |
| Caracteristic | Omni |
| System Complies with Standard | IEC 61672 (where applicable) |
| MADI Option | |
| Connectors | 1 BNC In, 1 BNC Through. 75 Ohm |
| Function | Audio de-embed and MADI through |
| Number of channels | 28, 32, 56, 64 in |
| Samples Rates | 44.1, 48 kHz, no varispeed supported |
| Complies with Standards | AES10-2008 r2014 |
| Digital Output Phase | < 0.5 % of sample period |
| Input Variation Before Sample Slip | ± 25 % of sample period |
| Input Signal Tolerance | Complies to AES10-2008 r2014 |
| Output Signal Level | Complies to AES10-2008 r2014 |
»
