Se connecter
Se connecter

ou
Créer un compte

ou
FR
EN

Sonodyne SRP 600

Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos

Enceinte de monitoring active de la marque Sonodyne appartenant à la série SRP

Déposer un avis

Argus du Sonodyne SRP 600

Avertissement

Attention, cette cote argus a plus de 6 mois.

Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Où acheter SRP 600 ?
Moins
  • Neuf
  • Occasion
Aucun revendeur ne propose ce produit pour le moment.
Alerte disponibilité
Il n’y a pas de petite annonce pour ce produit.
Alerte nouvelle annonce

Fiche technique

DESCRIPTION 2 way biamplifier speaker
TRANSDUCER COMPLEMENTS

LF: Magnetically shielded 6.5" kevlar cone woofer in die-cast chassis

HF: Magnetically shielded 26mm silk dome tweeter with custom waveguide

ENCLOSURE TYPE Vented, through front-firing aerodynamic port
ENCLOSURE MATERIAL  Pressure die-cast aluminum
OVERALL FREQ. RESP. (±2dB)  48Hz ~ 21kHz
USABLE FREQ. RANGE (-10dB) 42Hz ~ 25kHz   
MAX. LONG TERM SPL, 1/2 SPACE 107dB
HORIZONTAL BEAM WIDTH 86° (averaged b/w 5~16kHz)
VERTICAL BEAM WIDTH 69° (averaged b/w 5~16kHz)
TOTAL HARMONIC DISTORTION (@ 95dB SPL) 80Hz ~ 200Hz < 3%; > 200Hz < 1%
AMP. POWER BEFORE CLIPPING LF: 80W, HF: 50 W
S/N RATIO (AT UNITY GAIN) > 90dB, referred to full output
AMP. THD AT RATED POWER < 0.04%
INPUT: Fully balanced through XLR & TRS sockets
INPUT LEVEL FOR 90dB SPL @1M +7dBU
CMRR >65dB
CROSSOVER FREQ  2kHz
GAIN CONTROL RANGE -70dB ~ +10dB, 0dB at (detented) centre
LOW SHELVING EQ 50Hz ~ 250Hz, -3dB ~ +3dB in 0.75dB steps
HIGH SHELVING EQ 4 kHz ~ 20 kHz, -3 dB ~ +3dB in 0.75dB steps
BASS ROLL-OFF  80Hz, 12dB/ octave 
CONTROLS : FRONT Power Switch and Gain Control
CONTROLS : REAR Low shelving, High shelving, Bass roll-off
INDICATOR Power ON/OFF
PROTECTION  Over current, Overheat , RFI, Switch on/ off transients
POWER REQUIREMENT  230VAC, ±10%, 50Hz; 115V optional
POWER CONSUMPTION 175VA Max. 
FINISH  Powder coated (G: grey / W: white / B: black)
DIM. (WxHxD) mm 250 x 340 x 240
NET WEIGHT 11.9kg
INSERTS FOR MOUNTING 2 x M6 inserts on rear, 4 x M6 inserts on bottom
WALL MOUNT BRACKET SRP WB 2

Source : http://www.sonodyne.com/

»

News

Autres catégories dans Enceintes de monitoring

Où acheter SRP 600 ?
Moins
  • Neuf
  • Occasion
Aucun revendeur ne propose ce produit pour le moment.
Alerte disponibilité
Il n’y a pas de petite annonce pour ce produit.
Alerte nouvelle annonce