Acheter neuf Tannoy VXP 12
- Distri Scenes Pas de stock / Livré en 48h 1 498,00 €
Annonces VXP 12
Alerte nouvelle annonceForums Tannoy VXP 12
Fiche technique
- Fabricant : Tannoy
- Modèle : VXP 12
- Série : VXP
- Catégorie : Enceintes de sono amplifiées
- Fiche créée le : 26/03/2015
PERFORMANCE
| Frequency Response (-3 dB) (1) Full Range Mode |
70 Hz – 25 kHz |
| Frequency Range (-10 dB) (1) Full Range Mode |
55 Hz - 38 kHz |
| Frequency Response (-3 dB) (1) Hi-Pass mode |
100 Hz – 25 kHz |
| Frequency Range (-10 dB) (1) Hi-Pass mode |
80 Hz – 38 kHz |
| Dispersion (-6dB) |
90 degrees conical |
| Driver Complement | 1 x 305 mm (12.00”) constant directivity Dual Concentric™ |
| Crossover | Passive 1 kHz with HF protection |
| Directivity Factor (Q) | 9.6 (averaged 1kHz to 8kHz) |
| Directivity Index (DI) | 9.8 dB (averaged 1kHz to 8kHz) |
| Rated Maximum SPL (2) | Average: 121 dB Peak: 127 dB |
| Distortion 10% Full Power (12.65 V) 250 Hz 1 kHz 10 kHz |
2nd Harmonic 3rd Harmonic 0.52% 0.58% 2.98% 0.63% 3.58% 0.19% |
| Distortion 1% Full Power (4 V) 250 Hz 1 kHz 10 kHz |
2nd Harmonic 3rd Harmonic 0.10% 0.58% 0.81% 0.63% 1.18% 0.03% |
CONSTRUCTION
| Enclosure | 36.4 litre, 15mm (enclosure) and 18 mm (front) birch plywood, vented and internally braced. |
| Finish | Textured black or white paint, with custom colours on request. Powder coated perforated steel grille, Airnet cloth behind |
| Connectors |
1 x female XLR (input), 1 male XLR (link), 1 x Neutrik Powercon |
| Controls & Indicators |
Level Control Power LED (Blue) Signal LED (Green) Limit/Protect LED (Red) Full Range / HighPass Switch (110Hz) Power Mode Switch Power Switch |
| Fittings | 8 x M10 Flying inserts (portrait or landscape mounting), 8 x M10 yoke bracket inserts 1 x Integrip carrying handle Blanking plate for optional VTH pole mount |
| Dimensions (H x W x D) | 486 x 370 x 360 mm (HxWxD) (19.1 x 14.6 x 14.1” ) |
| Net Weight | 19.0 kg (41.9 lbs) |
| Shipped Weight | 21.5 kg (47.4 lbs) |
| Packed Quantity | 1 |
ELECTRONICS
| Maximum signal input for clip | 'Input attenuator at Maximum: 4.5 dBu (Hard clip will occur at 14.5 dBu input signal) |
| Dynamic Range | '106 dB |
| Efficiency | >90% |
| Damping Factor | >400 ref 8 ohm at 1 kHz |
| Distortion | <0.05% @ 1 kHz -3 dB output (22 kHz bandwidth) |
| Input Impedance | 10 kohm unbalanced, 20kohm balanced |
| Protection systems Over Current Clip limiter Temperature Brownout Mains Indicators |
Output current limiter, always active Output voltage clip limiter, always active Over temperature causes protective mute Automatic protection & recovery Inrush current limiter 1x Power LED, 1x signal LED, 1x Limit LED (Power LED: Red = StandBy, Green = On, Yellow = Temperature protection active) |
| Amplifier Type | Inherently bridged, globally modulated, high performance single channel class D. |
PSU SPECIFICATIONS
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Universal mains input |
| Type | High efficiency, regulated switch mode power supply |
| Efficiency | >85% typical |
| Input voltage | 100Vac-240Vac /- 10%, 50-60 Hz /-10% |
| Mains fuse | Internal |
| Fuse type | 3,15AT |
| Other features | Inrush current limiter |
| StandBy power consumtion | <1 W |
| Idle power consumption | <15 W |
| Maximum power consumtion | 300 W |
| Notes: (1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber. | |
Source : http://www.tannoypro.com/#!Page=Product&Id=122.407
»
Autres catégories dans Enceintes de sonorisation
Autres dénominations : vxp12