Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
Tannoy VXP 15HP
Photos
1/7

Tannoy VXP 15HP

Enceinte de sono amplifiée de la marque Tannoy appartenant à la série VXP

Écrire un avis ou Demander un avis

Acheter neuf Tannoy VXP 15HP

  • Distri Scenes Pas de stock / Livré en 48h 1 639,00 €

Annonces VXP 15HP

Alerte nouvelle annonce

Images

Fiche technique

  • Fabricant : Tannoy
  • Modèle : VXP 15HP
  • Série : VXP
  • Catégorie : Enceintes de sono amplifiées
  • Fiche créée le : 26/03/2015

PERFORMANCE

Frequency Response (-3 dB) (1)
Full Range Mode
60 Hz – 25 kHz
Frequency Range (-10 dB) (1)
Full Range Mode
47 Hz - 30 kHz
Frequency Response (-3 dB) (1)
Hi-Pass mode
100 Hz – 25 kHz
Frequency Range (-10 dB) (1)
Hi-Pass mode
80 Hz – 30 kHz
Dispersion (-6dB)

75 degrees conical

Driver Complement 1 x 380 mm (15.00”) constant directivity PowerDual™
Crossover Passive 1.3kHz
Directivity Factor (Q) 9.7 (averaged 1 kHz to 8 kHz)
Directivity Index (DI) 9.9 (averaged 1 kHz to 8 kHz)
Rated Maximum SPL (2) Average: 125 dB
Peak: 131 dB
Distortion
10% Full Power (17.9 V)
250 Hz
1 kHz
10 kHz

2nd Harmonic     3rd Harmonic
1.0%                    0.56%
1.4%                    1.0%
3.9%                    1.8%
Distortion
1% Full Power (5.6 V)
250 Hz
1 kHz
10 kHz

2nd Harmonic     3rd Harmonic
0.31%                  0.45%
0.45%                  0.79%
3.16%                  0.32%

 

CONSTRUCTION

Enclosure 54.9 litre, 18 mm birch plywood, vented and internally braced.
Finish Textured black or white paint, with custom colours on request.
Powder coated perforated steel grille, Airnet cloth behind
Connectors
1 x female XLR (input), 1 male XLR (link), 1 x Neutrik Powercon
Controls & Indicators
Level Control 
Power LED (Blue)
Signal LED (Green)
Limit/Protect LED (Red) 
Full Range / HighPass Switch (110Hz)
Power Mode Switch
Power Switch
Fittings 8 x M10 Flying inserts (portrait or landscape mounting), 8 x M10 yoke bracket inserts
1 x Integrip carrying handle
Blanking plate for optional VTH pole mount
Dimensions (H x W x D) 590 x 450 x 420 mm (HxWxD)
(23.2 x 17.7 x 16.5” )
Net Weight 29.0 kg (63.9 lbs)
Shipped Weight 31.5 kg (69.4 lbs)
Packed Quantity 1

 

ELECTRONICS

Maximum signal input for clip 'Input attenuator at Maximum: 4.5 dBu
(Hard clip will occur at 14.5 dBu input signal)
Dynamic Range '106 dB
Efficiency >90%
Damping Factor >400 ref 8 ohm at 1 kHz
Distortion <0.05% @ 1 kHz -3 dB output (22 kHz bandwidth)
Input Impedance 10 kohm unbalanced, 20kohm balanced
Protection systems
Over Current 
Clip limiter
Temperature 
Brownout
Mains
Indicators 

Output current limiter, always active
Output voltage clip limiter, always active
Over temperature causes protective mute
Automatic protection & recovery
Inrush current limiter
1x Power LED, 1x signal LED, 1x Limit LED
(Power LED: Red = StandBy, Green = On, Yellow = Temperature protection active)
Amplifier Type Inherently bridged, globally modulated, high performance single channel class D.

 

PSU SPECIFICATIONS

Input Connector Locking Neutrik Powercon
Voltage Selection Universal mains input
Type High efficiency, regulated switch mode power supply
Efficiency >85% typical
Input voltage 100Vac-240Vac /- 10%, 50-60 Hz /-10%
Mains fuse Internal
Fuse type 3,15AT
Other features Inrush current limiter

 

StandBy power consumtion <1 W
Idle power consumption <15 W
Maximum power consumtion 300 W
Notes: (1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber.

Source : http://www.tannoypro.com/#!Page=Product&Id=122.411

»

Autres catégories dans Enceintes de sonorisation

Autres dénominations : vxp15hp, vxp 15 hp, vxp15 hp