JHS Pedals 3 Series d'occasion

B-Stock, JHS Pedals 3 Series Bit Crusher, from the '3S' pedal series, digital distortion effect, reduces bit depth and sample rate with an additional filter section, produces aliasing, artifacts, metallic and ring modulator-like effects, all the way to digital collapse, sound spectrum ranges from subtle texture to extreme digital destruction, provides precise sound control with intuitive operation, Crush control for adjusting the bit depth from 24 bits to 1 bit, Sample Rate control reduces the sampling rate from 32.768 kHz to 2.5 Hz, Filter control shapes the signal by adjusting the cutoff frequency, Type switch offers a choice between two filter characteristics: Filter Type (bottom) 2-pole low-pass filter without resonance, inspired by vintage synths (e.g., Oberheim), Filter Type (top) combination of high-pass and low-pass filters for focused mids (Lo-Fi style), On / Off switch, Status LED, 6.35 mm jack input, 6.35 mm jack output, power supply via optional 9V DC power adapter (not included), center negative, current consumption 65 mA, dimensions (L x W x H) 4.42'' x 2.38'' x 1.22'' / 112.3 x 60.5 x 31 mm, weight .87 lbs / 395 g, B-Stock with full warranty, may have slight traces of use

Pas servi, juste essayé, puis oublié. Conservé dans son emballage d'origine complet.

B-Stock, JHS Pedals 3 Series Tape Delay, delay effects pedal from the JHS Pedals 3 Series, reproduces the sound of classic tape delays, Tape Speed acts as a simulation of the RE-201’s tape motor speeding up and slowing down, Flutter toggle introduces a mild modulation reminiscent of vintage units with mechanical wear, true bypass, controls for Mix, Tape Speed, Repeats, Flutter toggle switch, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter (not included) 2.1 mm x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 65 mA, dimensions (L x W x H) 112 x 60 x 31 mm / 4.42"" x 2.38"" x 1.22"", weight ca. 210 g / 0.46 lbs, B-Stock with full warranty, may have slight traces of use

B-Stock, JHS Pedals 3 Series Reverb; reverb effects pedal from the JHS Pedals 3 Series, intuitive controls offer a wide range of possible sounds, ranges from small room sounds to nearly endless washes of ambiance, Pre-Delay toggle creates a short delay between the time the reverb starts and the original signal, true bypass, controls for Verb, EQ, Decay, Pre-Delay toggle switch, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 74 mA, dimensions (L x W x H) 112 x 60 x 31 mm / 4.42"" x 2.38"" x 1.22"", weight ca. 210 g / 0.46 lbs, made in USA., B-Stock with full warranty, may have slight traces of use