Acheter neuf Radial Engineering Mini Catapult
- Woodbrass En stock / Livré en 24h 148,00 €
- Music Store En stock / Livré en 48h 148,00 €
- Bax Music En stock / Livré en 48h 148,00 €
- Thomann En stock / Livré en 48h 148,00 €
- Music Store En stock / Livré en 48h 148,00 €
Annonces Mini Catapult
Alerte nouvelle annonceImages
Avis
jean33marcelAdieu les multis long lourd et les buzz.
Publié le 13/03/20 à 12:37Fiche technique
- Fabricant : Radial Engineering
- Modèle : Mini Catapult
- Catégorie : Câbles multipaires
- Poids du colis : 511 g
- Fiche créée le : 12/03/2020
Specifications
Audio circuit type: Passive splitter
Frequency response: 7Hz ~ 20KHz
Dynamic range: 140dB
Total harmonic distortion: 0.0005% @ 1kHz
Common Mode Rejection Ratio: >103dB
Maximum Input: +35dBu
Features
Ground lift
Input Connectors: XLR, TRS, RJ45 (model dependant)
Output Connectors: XLR, TRS, RJ45 (model dependant)
General
Construction: 16-gauge steel chassis & outer shell
Size (L x W x D): 4.125" x 1.56" x 1.31" (105 x 40 x 33mm)
Weight: 0.85lb (0.4kg)
Shipping size (L x W x D): 6.25" x 4.25" x 3" (159 x 108 x 76mm)
Shipping weight: 1.1lb (0.5kg)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable
Catapult Mini
Compact Cat 5 Analog Snake
4-Channel Cat 5 Audio Snake
The Catapult Mini is a compact passive audio snake that allows you to send
four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.
Send four channels of analog audio over a Cat 5/6 cable
Available with XLRM, XLRF or ¼” TRS connectors
Works with a building’s existing cable infrastructure
Compact and lightweight, yet durable and rugged
Economical Cat 5/6 cable replaces bulky multichannel audio snakes
Analog audio over Cat 5 wiring
The Catapult Mini System works like a typical four-channel analog audio snake;
they allow you to send mic or line-level signals from one location to another without signal loss,
noise, or interference, and without any digital audio conversion needed.
What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable,
which is widely available, lightweight, and economical.
Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use
the analog conductors in the cable to deliver four balanced audio lines to any destination.
Straight-wire passive operation
Catapult modules require no power to operate, and since they keep the signal in the analog realm,
no digital conversion is necessary. Straight-wire connection from the XLRs to the
RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.
Utilize pre-existing cable installations
As many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit
audio between distant rooms without the need to install or supply new cabling.
This eliminates the need for bulky and expensive multi-channel audio cable,
and allows contractors to benefit from installed network cable and easily connect from one room to another.
Mix & Match
Three versions of the Catapult Mini are available: The Mini TX features female XLR connectors,
the Mini RX has male XLRs,
and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.
Autres catégories dans Câbles & connectiques
Autres dénominations : minicatapult