Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
AEA TRP ribbon pre
Photos
1/18

AEA TRP ribbon pre

Préampli à transistors de la marque AEA

1 avis
Comparateur de prix
Petites annonces
Forums

Annonces TRP ribbon pre

Alerte nouvelle annonce

Images

Avis

5.0/5
(1 avis)
100 %
(1 avis)
Donner un avis
moosersmoosers

AEA TRP ribbon prePublié le 03/05/10 à 20:25
contenu en anglais (contenu en anglais)
The AEA TRP Ribbon Pre is definitely the only 'ribbon only' mic pre that I've used, or even seen for that matter that I can remember. The TRP is two channels that each have XLR and 1/4" inputs and outputs. This is a very compact preamp and won't take up a full space in a traditional casing, as it takes up about half of a single space.

UTILIZATION

There isn't too much to know about the AEA TRP Ribbon Pre in terms of using it. Each channel simply has parameters for gain and level, and then there are buttons for a high pass filter and polarity. It of course doesn't have phantom power since that isn't needed for ribbon microphones and would actually be detrimental to the mics if used. A manual isn't necessary at all for the TRP.

SOUND QUALITY

While it would make sense to use the AEA TRP Ribbon Pre with an AEA ribbon mic, I've yet to have the chance to try out this chain. I would imagine that this would be the best use for the TRP since gear made by the same brand usually works best in tandem. However, the TRP sounds great for recording with a Royer 121, and I would bet that it would sound great across the board with ribbon mics. I've also used it as a stereo coupling with the Coles 4038 ribbon mics, which were also a great match. Since the TRP is designed for use only with ribbons, it gives you more than enough head room and picks up all the details that you would be after with a ribbon mic.

OVERALL OPINION

I wouldn't recommend the AEA TRP Ribbon Pre for home studio owners, as most home studio owners won't be using ribbon microphones enough to justify having something like this. Both for those professional and home studio owners who do have a few ribbon microphones and use them a lot, having the TRP around would definitely be a worthwhile investment. Having an AEA isn't a requirement, but would certainly sweeten the deal. While ribbon microphones will of course sound great with other preamps too, the TRP is a great sounding preamp with extended coverage for ribbons.
»

Fiche technique

  • Fabricant : AEA
  • Modèle : TRP ribbon pre
  • Catégorie : Préamplis à transistors
  • Fiche créée le : 11/05/2009

Préampli stéréo principalement dédié aux micros rubans (ayant en général un faible niveau de sortie) et à tout type de micro n'utilisant pas de 48 Volts externe.

Le préampli stéréo A.E.A est principalement dédié aux micros rubans (ayant en général un faible niveau de sortie) et pour tout type de micro n'utilisant pas de 48 Volts externe.

En simplifiant au maximum l'architecture interne Fred Forssell le créateur, nous offre un préampli disposant d'un gain maxi de 84 avec un rapport signal/bruit remarquable !! Un premier étage de puissance allant de +6 à +63 dB est accessible via un potentiomètre Grayhill et un autre gain de +21 dB (en sortie) donnent un gain total de 84 dB, le préampli dispose aussi d'un inverseur de phase, d'un filtre coupe bas et d'un voyant de surcharge.

Source : Juke Box Limited

»

Autres catégories dans Préamplis microphones

Autres dénominations : trp ribbon pre, trpribbonpre