MPC1000XLCD
- 70 réponses
- 10 participants
- 11 351 vues
- 8 followers
le rat
premières infos ici :
moupsmpc
ça peut etre un plus pour nos mpc ..à voir le prix
et pourquoi pas un port VGA sur le truc?
Glazup
Pour le prix : j'ai lu sur MPC Forum "Price point should be under $200.00 - still working out some of the overall costs of production compared to price which we wont know totally for a couple more weeks.
The 2500s will be available first (sorry MPC1000 guys) it was only because we finished the MPC2500 design first since it was a bit easier given the area to mount."
Et en plus ce n'est pas pour de suite...
Anonyme
le rat
le rat
le rat
Ya du nouveau sur la page de JJ.
Citation de JJ :
JJ OS128XL is pay OS. (Installation is free)
The price of a password is US$98.00.
http://www7a.biglobe.ne.jp/~mpc1000/128xl/
Citation de JJ :
Please perform installation of OS128XL from the load screen of OS128 bundled with large LCD. (From other OS's, it is not installable.)
Please adjust the contrast of LCD by the LCD side. (Adjustment of contrast cannot be performed in the MPC side)
The password of OS128XL is effective only in OS12XL.
Therefore, each password is required to use other JJ OS, even if it enters the password of OS128XL.
Please refer to the comparison chart of OS for a function.
Compatibility (The compatibility with other OS's is the same as OS2XL)
Although basic specification is the same as OS2XL, about the following, it is not compatible.
In ADSR, the value of the parameter which is not in OS128XL is not reflected.
The data of Q-link is not reflected.
A setup of not Non-Destructive Chop is not reflected.
A setup of mute of a program is not reflected.
Since specifications differ, a setup of a cycle is not reflected.
Other tracks are influenced when the same program is used. (It is the same specification as OS's other than OS2XL)
The function which is in OS2XL and is not in OS128XL
Since adjustment of the start/end of a sample was added to the program mode, there are not PgmMode and CHOP of a trim
The load of CPU is large, or since a problem arises, OS128XL does not have the following function.
Simul Sequence
EQL and EQH of FILTER
PATCHED PHRASE
Q-link is only REAL TIME.
There are not SAMPLE START of Q-link, SAMPLE END, and CHOP.
OVER RAP mode of PROGRAM (INST)
ADSR
Pad Aftertouch
OUT L, R
Pitch Bend Sensitivity
Bars loop
There is no function to control the value of the parameter of an effect by a MIDI controller.
The mixer of a pad is uncontrollable by a MIDI controller.
There is no function to assign the mode to the NUMERIC button.
Please refer to OS Comparison Chart for a function.
http://www7a.biglobe.ne.jp/~mpc1000/chart.htm
[ Dernière édition du message le 24/06/2012 à 18:00:30 ]
twÿce
le rat
Lien vers le manuel
http://www7a.biglobe.ne.jp/~mpc1000/128xl/manual.htm
- < Liste des sujets
- Charte