Extenssion systême

TO SAVE BUFFER (CURREMT) BANK TO SECURE BANK:
Pres the write button(write protect whitch most be off) and wenn the display flashes, press the bank hold button . Display will now show: SauE b _. This means “save to bank(b) ___.” Use the keypad to enter a number from 1-8. as soon as xou press this button, youwill have copied the entiere bank into storage location, erasing any previous contents. The bank will continue remain in the buffer mamory until some other sounds are loaded. Be sure to keep a list of which bank have sounds in them so that you will not accidentelly over-write them in the future. Continue to save banks to tape for secure storage outside the DW . also: remember write your patch edit into the bank buffer before saving the buffer memory to bank storage mamory.

CAUTION:You will activate the load operation when using the bank hold switch for its normal functiions. It is very important that you do not use the buffer memory as the only storage as onlystorage location for any sounds or bank of sounds untill you are familiar with turbo. You may inadvertantly load a bank in to bankbuffer memory while attemptingto exit the bank hold funktion.beware this happents location every time I create or edit a patch to avoid accidentally loosing programs. In all cases:if you enter the load bank procedure, and and dond wish load new bank , stop and think before proceedingbeyond display!!!! Always pess the bank hold button again to exit before doing anythingeelse. Once you get accustomed to this you will be the likely to make mistakes.