Combos guitare d'occasion

Vends ampli guitare excellent état, idéal pour rock, blues. Le son fender et la puissance des lampes. Excellent rapport poids puissance. Utiliser uniquement à la maison. Préampli : à lampes (3 x 12AX7) Ampli : à lampes (2 x EL84) Puissance : 15 Watts Baffle(s) : 1 x 12" Fender "Lightneng Bolt" par Eminence Canaux : 1 canal Effets : réverb à ressorts Dimensions : 406 x 457 x 233 mm (H x L x P) Poids : 14 kg

Marshall JCM 900 100W 4502 2x12" combo (années 1990) Clean channel: sonne comme un JCM 800 Dirty channel: de clean à léger overdrive vers 7-10 (blues) au son plus entre overdrive 1-3 et fuzz 7-10 avec du grave à souhait (SRV lead) Condition: 9.5/10 super état, studio seulement, tolex sans marque The JCM-900 Series replaced the JCM-800 Series in 1990. This new series featured two basic models: the Hi-Gain Master Volume MK III and the Hi Gain Dual Reverb. The Hi-Gain Master Volume MKIII was the latest incarnation of the popular Models 2203 and 2004, while the Hi-Gain Dual Reverb was an updated version of the JCM 800 Models 2205 and 2210. Marshall responded to consumer demand at the time, and added more gain and distortion to this series as well as improved effects loops. The gain section featured two stages with two different knobs - the first one ranged from the standard 0 to 10, while the second knob added on to this by ranging from 10 to 20. Guitarist Nigel Tufnel of Spinal Tap is largely credited with coming up with the extra stage of gain. In the movie This Is Spinal Tap, Tufnel's Marshall has a gain knob that goes one beyond the normal highest point of ten to eleven. Marshall actually had Sir Christopher Guest (the actor who played Nigel Tufnel) at the Winter NAMM show in 1990 to introduce the new JCM 900 Series. Other features of the JCM 900 Series include a series effects loop with adjustable levels, a high/low power switch that acts as a half-power switch by changing the tube's operation from pentode to triode, two line outputs including a direct out and a new recording compensated recording out, and new tube output protection fuses that would blow a fuse if a tube failed protecting the amp from damage. Marshall also introduced a new numbering system for the JCM 900 Series that actually supplied information about the model's specifications instead of being a random number assignment. Like their previous numbering system, the new system featured four numbers, but that is where the similarities ended. The first number indicated which one of two chassis the amp featured with a 2 for the Hi-Gain Master Volume chassis and a 4 for the Hi-Gain Dual Reverb. The second and the third numbers indicated which one of two wattage outputs the amp had with 50 for 50 watts and 10 for 100 watts. The final number indicated the configuration of an amp: a 0 for a head-unit, a 1 for a 1-12 in. combo, or a 2 for a 2-12 in. combo. The JCM 900 Series remained largely unchanged for their production run, aside from the two Hi-Gain Master Volume heads. In 1993, the Model 2100 and 2500 were updated by adding an extra preamp tube for more gain. These amps were called the SL-X, which stood for Super Lead Extended. These new SL-X amps were also referred to as MKIVs in Marshall's literature and price lists, but neither these nor the MKIII models (Models 2100 and 2500) had these markings anywhere on the amplifiers. The JCM 900 was discontinued after 1998 when it was replaced by the JCM 2000 Series that featured the new DSL (Dual Super Lead) and TSL (Triple Super Lead) heads.

Ampli guitare Fender THE TWIN Bon état général , Possibilité de venir l'essayer à Couilly pont aux dames

AMPLI COMBO TOUT LAMPE vendu avec son footswitch (reverb et canal disto) et notice sur roulette, prix ferme made in USA A essayer sur place Échange possible contre tête traynor • All-Tube signal path • 2 x 12" Celestion Vintage 30s Ampli combo 60W entièrement à lampes, 3 canaux équipée de 3 modes rectifier. puissance de 60 Watts 2 lampes Sovtek 6L6 pour l’étage de puissance 5 lampes 12AX7 pour la section préampli. Ce combo 2 canaux fonctionne en Mode Rectifier ce qui vous permet de choisir entre 3 modes d’amplification différents : transistor, classe A ou lampe AB. Le canal overdrive comporte 2 niveaux de distorsions, un réglage de gain ainsi qu’un équalizer 3 bandes. Le ST-6012 est équipé d’une sortie ligne, d’une sortie casque et d’un insert d’effets avec niveau réglable, elle est livrée avec un pédalier de commande pour le changement de canal, le contrôle de la réverb et la commande du niveau de gain du canal overdrive. 2 x 6L6- 5 x 12AX7- 1 x 12AT7- 1 x 5AR4- Mode Rectifier: Tube A, Tube AB1, ou transistor- Canal overdrive Gain 1 et Gain 2 avec master volume indépendant, EQ 3 bandes, contrôle de contour Canal clair avec réglage de niveau et EQ 3 bandes.- Master volume et réverb - Insertion d’effets avec réglage de niveau Sortie ligne avec réglage de volume.- Sortie HP jack avec sélection 4 / 8 / 16 Ohms.- Livrée avec un pédalier pour le changement de canal, réverb on/off et sélection de gain du canal overdrive.- Switch d’inversion de polarité.- Construction ultra solide en bois 13 plis- Livré avec roulettes ultra solides • Poids 32 kgs

Je vends ce vox à modelisation qui fonctionne très bien Essai possible sur place