Se connecter
Se connecter

ou
Créer un compte

ou
Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos
FabFilter Pro-C
Photos
1/8

Tous les avis sur FabFilter Pro-C

9/10
Insatisfait(e) des avis ci-contre ?
Filtres
5.0/5
(3 avis)
67 %
(2 avis)
Donner un avis
Rapport qualité/prix : Excellent
Test de la rédaction
FabThree

Test du Mastering Bundle de Fabfilter

9/10
Et si 3 plugs suffisaient à remplacer les 6 EQ, les 8 compresseurs et les 5 limiteurs qui encombrent le répertoire 'Effets' de votre séquenceur ? Et si ces trois plug-ins étaient vendus en bundle ? Et si ce bundle était en test sur AudioFanzine ? Vous le liriez le test, hein ? Ne vous fatiguez pas à répondre : vous êtes déjà en train de le lire… Lire la suite…
Avis des utilisateurs
  • FurtFurt

    Lorsqu'on allie la beauté à l'efficacité !

    FabFilter Pro-CPublié le 16/06/13 à 23:38
    L'installation se fait-elle sans problème ?
    Oui
    La configuration générale est-elle facile ?
    Oui lorsqu'on connait le fonctionnement d'un compresseur.
    Avez vous rencontré des incompatibilités ?
    Aucune
    Le manuel est-il clair et suffisant ? ...
    Je, n'en sais rien étant totalement allergique à l'anglais.

    10/10

    ADÉQUATION/PERFORMANCE

    Quelle est la configuration de votre ordinateur ? (Carte mère/processeur/Ram/disque/carte son..)
    MacBook Pro, carte son TC Studiokonnect 48 avec Logic pro9 et Pro Tools10.
    Configuration d'une stabilité à toute épreuve.
    10/10

    AVIS GLOBAL

    Depuis combien de temps l'utilisez vous ?
    Un an.
    Aviez vous essayé beaucoup d'autres modèles av…
    Lire la suite
    L'installation se fait-elle sans problème ?
    Oui
    La configuration générale est-elle facile ?
    Oui lorsqu'on connait le fonctionnement d'un compresseur.
    Avez vous rencontré des incompatibilités ?
    Aucune
    Le manuel est-il clair et suffisant ? ...
    Je, n'en sais rien étant totalement allergique à l'anglais.

    10/10

    ADÉQUATION/PERFORMANCE

    Quelle est la configuration de votre ordinateur ? (Carte mère/processeur/Ram/disque/carte son..)
    MacBook Pro, carte son TC Studiokonnect 48 avec Logic pro9 et Pro Tools10.
    Configuration d'une stabilité à toute épreuve.
    10/10

    AVIS GLOBAL

    Depuis combien de temps l'utilisez vous ?
    Un an.
    Aviez vous essayé beaucoup d'autres modèles avant de l'acquérir ?
    Oui Les compresseurs fournis avec Samplitude, Logic et Pro Tools + quelques uns de chez Waves.

    Quelle est la particularité que vous aimez le plus, le moins ?
    La facilité d'emploi, l'efficacité, le son, le look et surtout l'intelligence de la conception des plug ins de FabFilter, avec, notamment la possibilité de visualiser en temps réel, sur la forme d'onde, l'action du compresseur.


    Comment jugez vous le rapport qualité/prix ?
    Excellent.

    Avec l'expérience, referiez vous ce choix ? ...
    Oui, j'ai également acheté chez eux le limiteur et l'EQ.


    Lire moins
  • moosersmoosers

    FabFilter Pro-CPublié le 07/11/10 à 00:14
    contenu en anglais (contenu en anglais)
    The FabFilter Pro-C is an extremely flexible and unique compression plug-in that is available for all systems and platforms as far as I can tell. I don't own the plug-in myself, although I sure wish I did! Since I don't yet own it, I can't speak to the installation process. A producer who I work as an assistant for has most of the FabFilter plug-ins on his system at home, so I've been messing with them whenever I'm working over there with him. There's a ton that can be done with the Pro-C, so don't expect it to be the kind of plug-in where you're going to learn everything about it after one usage. The main parameters are pretty standard simple, with settings for input/pan, threshold, ratio, attack, release, output/pan, mix, and an additional side chain. The graphs here are really what set it apart, as I don't think I've seen too many that actually will show you the knee compression graph. The plug-in has three different modes to choose from as well - classic, opto, and clean, while it also has a more standard compression graph as well. If you're buying this plug-in, you might as well have the manual around as to not miss anything.

    SUITABILITY/PERFORMANCE

    I don't know all of the details about the system that I've been using the FabFilter Pro-C on, but it's Pro Tools HD which really says it all. It doesn't take up as small amount of processing power as many plug-ins out there do, but by no means did I experience any problems running the software on this system. If I were running it in Pro Tools LE this might be a different story, but it all depends on the full system you're running it on...

    OVERALL OPINION

    The FabFilter Pro-C is quickly becoming one of my favorite compression plug-ins. I love how much flexibility you have here, as between the three different modes it's possible to get some pretty differing sounds. Having the built in side chain is huge as well as it just extends the possibilities here. The sounds are always clean and professional, and if you know how to use it there's a good chance you're going to get some killer sounds with it. Priced at $200 USD, this is one of the best compressors in general and even more so when you think of the price!
  • songboysongboy

    Compresseur très polyvalent

    FabFilter Pro-CPublié le 05/08/11 à 06:21
    contenu en anglais (contenu en anglais)
    This is used mainly on a Mac Pro Duo running Snow Leopard. If you are familiar with compression than you will not need a manual. This plugin has the standard compression components including hard/soft knee and the ability to toggle between Clean, Opto and Classic (which sounds like FET to me). The boys over at FabFilter really do a great job making an inviting interface. This is still quite a busy interface especially with the Analyzer window dancing around, but it remains easy to look at with big writing and large knobs and graphs. All functions are easily located directly from the face of the plugin.

    SUITABILITY/PERFORMANCE

    The Pro-C is very solid and accurate. No crashes or glitches of any sort. As for performance, this is a great utility compressor. Both the Opto and the "Classic" add some character but the Clean channel is really my favorite, as it is quite clean and great for electronica. Sidechaining is a breeze thanks to Logic's built in GUI Header. You must select "EXT" in the expert menu on the Pro C first. Overall this plugin has been used a lot lately whenever we need compression that doesn't add much character.

    OVERALL OPINION

    This is a overall great plugin but the thing that stands out for me the most is something very simple....Undo/Redo buttons! Thank god some people still realize how valuable those are, especially if you have the parameters midi mapped and you accidentally bump one or have your midi controller force the plugins to match the hardware. Thank you FabFilter, I hope the rest of the Developers realize the importance of that little extra help. Not much to dislike about this plugin. It's relatively simple and does a good job. Everything about what FabFilter does is precise. The knobs are very fluid and everything flows. Kind of like migrating to Mac from PC. I have used many compressor plugins. My favorites are the Waves for character and before this plugin, I used the built in Logic compressor for most of my utilitarian stuff. Pretty expensive for the whole lot but these are solid plugins. I would recommend.