100% analog 6 stereo channel DJ mixer engineered by Andy Rigby Jones - former lead designer at Allen & Heath where he spent 25 years, and co-designed by Richie Hawtin - musician, DJ and technology adventurer.
2 STEREO RETURNS
2 STEREO SENDS
3 HIGH PERFORMANCE PHONO PREAMPS
TDK 60mm faders
EQ: SCULPT is a semi-parametric swept bell filter, and consist of two controls,FREQ which sets the centre frequency and CUT/BOOST which adjust the gain or a attenuation at this frequency. The level of cut/boost is asymmetric; maximum boost is limited to +8dB, while the cut is extended to -20dB. Sculpt has a wide Q and a frequency range that covers almost seven octaves.
CONTOURING LOW & HIGH PASS FILTERS: low Q, High-Pass and Low-Pass filters designed not to add colour to the sound as they are swept across their frequency range.
ANALOG OVERDRIVE on every input
Two independent Cue systems, A and B. Cue A routes to the right hand side headphone monitor and the Cue B routes to the left hand headphone monitor. The DualCue system makes it much easier for two DJs to perform on the mixer together in "Back2Back" setups, as each can select a separate channel to monitor without interfering with the other. This feature also assists DJ's handing off to each other in a smooth and natural way.
Fully balanced main mix bus
MIXER LINK: A system that allows multiple mixers to be linked together, either for use with two or more performers, or as a way to expand the number of channels. When Linked together the mixers share a common balanced mix feeding the PA and Booth monitors. In addition, the two Cue systems are joined allowing interactive cueing between multiple performers.
MASTER HIGH & LOW PASS RESONANT FILTERS
Three-Band Master EQ with asymmetric cut and boost, -20/+6dB
A 2-Band equaliser allowing the user to adjust the frequency response of the Booth monitors to suit their own preference.
All internal routing utilizes our zero-crossing detection system that helps minimize audio switching artifacts for channel filter selection, master filter on/off and master eq on/off. This system allows each of these functions to be used quickly and intuitively as performance effects.
external 90W 24V universal voltage PSU
Two fully balanced TASCAM DB25 inputs receiving all 8 Stereo channels for rapid connections to external soundcards and added flexibility in club installs.
Fully balanced TASCAM DB25 output for sending Master, Aux 1 & 2 Sends and Cue B channels down a single connector for rapid connections to external soundcards and added flexibility in club installs.
Mounted on the front panel at the top of the Master section the RECORD OUT - 3.5mm TRS Jack socket feeds the post Master EQ signal as a pre- fader record output. Nominal level is –2dB
Built in the UK with our partners DigiCo and Allen & Heath using alloy/steel chassis
|Maximum output level||+28dBu Balanced +23dBu Unbalanced|
|Output Impedance||50R Balanced, 68R Unbalanced|
|Residual Noise||-100dBu Un-weighted, 22Hz to 20kHz|
|Dynamic range||> 112dB|
|Frequency Response||20Hz - 40kHz +0/-2dB|
|Distor on (THD+N)||0.008% Line In to Mix 1 out, 0dBu Unity Gain|
|Inter-channel Crosstalk||< -100dB|
|Le'/Right Crosstalk||-80dB 1kHz|
|Power consumption||50W maximum|
|Dimensions||L 37cm x W 32cm x H 11.5cm|
|MODEL 1||3 199 €|
|MODEL 1||3 199 €|
|MODEL1||3 356 €|
|A VENDRE Play Differently MODEL 1 avec câblage||2 800 €||»|
Autres dénominations : model1