Argus du Mackie SA1521
Attention, cote argus calculée sur un petit nombre d'annonces
Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Fiche technique
- Fabricant : Mackie
- Modèle : SA1521
- Série : SA
- Catégorie : Enceintes de sono amplifiées
- Autres dénominations : sa 1521, 2 hp sa 1521 et 2 subswa 1501, 2hpsa1521et2subswa1501, 2 hpsa1521 et2 subswa1501, 2 hp sa1521 et2 sub swa1501, 2hp sa 1521et 2sub swa 1501
System Specifications
Frequency Range (–10 dB):
49 Hz–20 kHz
Frequency Response (–3 dB):
57 Hz–18 kHz
Horz. Coverage Angle (–6 dB):
75° averaged 1 kHz to 6 kHz
Vert. Coverage Angle (–6 dB):
65° averaged 1 kHz to 6 kHz
Sensitivity (1W@1m):
100 dB
Maximum SPL Long-term:
130 dB @ 1m
Maximum SPL Peak:
133 dB @ 1m
Crossover Point:
1300 Hz
Transducers
Low Frequency
Diameter: 15 in/381mm
High Frequency
Diaphragm Diameter: 1.75 in/44mm
Diaphragm Material: Titanium
Exit Throat: 1.00 in/28.4mm
Horn
Type: Constant Directivity
Mouth Size: 10.6˝ x 10.6˝
(27 x 27 cm)
Throat Size: 1.0˝ (2.54 cm)
Volume Control
Rotating Knob: –15 to +5 dB
(0 dB detent)
Amplifiers
Low Frequency:
Rated Output*: 400 watts RMS
continuous
Rated THD: <0.03%
Design: Class G, High Efficiency/
High Current
*Rated power is continuous RMS wattage into the transducer’s
rated impedance using a 100Hz sine wave.
High Frequency:
Rated Output*: 100 watts RMS
continuous
Rated THD: <0.03%
Design: Class AB
*Rated power is into the transducer’s rated impedance using a
1kHz sine wave signal.
Audio Input/Output
Main Input, Loop Out: 50kΩ impedance,
balanced
Connector Type: XLR
Line Input Power
US : 120V, 60 Hz
Recommended Amperage Service: 13 amps
AC Connector: 3 pin IEC- Male
Europe: 230V, 50 Hz
Recommended Amperage Service: 7 amps
AC Connector: 3 pin IEC-Male
Control System Functions
Electronic Crossover
Phase Alignment
Time Correction
Equalization
Electronic System protection
Thermal Overload protection
Independent High- and Low-Frequency Driver
protection
Indicator LEDs
Power On: Green LED
Signal Present: Green LED
Limit: Yellow LED
Thermal: Red LED
Safety Features
RMS Limiting:
Monitoring and limiting of continuous
RMS output of amplifiers
Thermal:
Monitoring of thermal condition of
power supply and amplifiers. High
temperature condition engages input-
stage shut down and autoreset function.
Physical
Enclosure:
Trapezoidal, 10° side angles, 18mm
multi-layered plywood, top and bottom
high-pressure resin injected “caps”
Handles:
One on top, one on bottom cap; one
three-piece handle on each side
Color:
Black, PVC coated finish
Grille:
Custom perforated oval steel grille with
anti-corrosive treatment
Mounting Methods:
Floor mount only—not suitable for flying
Pole-mountable via built-in socket on bottom
Dimensions
Height: 32.0 in/81.3 cm
Front Width: 19.1 in/48.5 cm
Rear Width: 13.9 in/35.3 cm
Depth: 18.1 in/46.0 cm
Net Weight: 101.0 lb/45.8 kg
Distribué par Algam / La boîte noire du Musicien
Avis utilisateurs
Manuels et autres fichiers
Autres enceintes de sono amplifiées Mackie
-
SA1532
Enceinte de sono amplifiée
-
SA1232
Enceinte de sono amplifiée
-
SRM650
Enceinte de sono amplifiée
-
SRM550
Enceinte de sono amplifiée
-
SRM750
Enceinte de sono amplifiée
-
TH-15A
Enceinte de sono amplifiée
-
Thump12
Enceinte de sono amplifiée
79 € neuf (2 offres) -
SRM450
Enceinte de sono amplifiée
280 € d'occasion (1 offre) -
Thump12A
Enceinte de sono amplifiée
-
Thump15A
Enceinte de sono amplifiée
