Se connecter
Se connecter

ou
Créer un compte

ou
FR
EN

PreSonus ULT10

Ajouter ce produit à
  • Mon ancien matos
  • Mon matos actuel
  • Mon futur matos

Enceinte de sono amplifiée de la marque PreSonus appartenant à la série ULT

Déposer un avis

Argus du PreSonus ULT10

Avertissement

Attention, cette cote argus a plus de 6 mois.

Les prix indiqués dans les petites annonces des particuliers sur Audiofanzine ne sont pas nécessairement les véritables prix de vente ou d'achat.
Les annonces avec options, ou constituant un pack, ne sont pas prises en compte.
Où acheter ULT10 ?
Moins
  • Neuf
  • Occasion
Aucun revendeur ne propose ce produit pour le moment.
Alerte disponibilité
Il n’y a pas de petite annonce pour ce produit.
Alerte nouvelle annonce

Fiche technique

Enceinte sono de deux voies amplifiée de 10 pouces

Main Components

  • 10-inch custom woofer with 2.5-inch voice coil
  • WorxAudio®-designed waveguide Pivot X110 horn for precise coverage
  • Ultra-wide 110˚ horizontal dispersion
  • Tight 50˚ vertical dispersion for longer throw
  • 1,300W Class D power (150x500W continuous)
  • XMAX preamp
  • Onboard mixer with two combo XLR and ¼” inputs
  • Direct line-input channel output
  • Single summed balanced output

Controls

  • Mic/Line Level
  • Line/Level
  • 3 operation mode presets
    • FOH – normal live front of house
    • DJ – Music playback
    • Mon – stage wedge floor monitor
  • HPF On/Off
  • Front LED On/Off

Convenience Features

  • Multi-angle enclosure for mains or monitor wedge application
  • Defeatable front-panel LED
  • Rugged, texture-painted eucalyptus plywood enclosures
  • Tour-grade 16 gauge steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with 6˚ downward tilt
  • Integrated M10 rigging points for suspended horizontal and vertical installation
  • Locking IEC connection

Acoustic Performance

Configuration 2-way biamped
Frequency Response (-3 dB) 60 Hz – 18 kHz
Frequency Response (-10 dB) 55 Hz – 20 kHz
Nominal Coverage (-6 dB) 110° x 50°
Maximum Peak SPL 130 dB
Crossover Frequency 1.6 kHz

Transducer

LF Transducer 1x10" Ferrite
Voice Coil Diameter 2.5”
HF Transducer 1.75" compression driver

Amplifier

Type Class D
Total Power Output 1,300W Peak (650 RMS)
LF Power 1,000W Peak (500W RMS)
HF Power 300W Peak (150W RMS)
Cooling Free air convection
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz

Connections and Controls

Input Channels 1 mic/line, 1 line
Input Connector Types 2 combo
Mic Input Impedance 1 kΩ
Line Input Impedance 10 kΩ
Maximum Input +22 dBu
Output Connector 2 XLR (M): Mix out, Direct out
Controls Mic/Line Level
Line/Level
Preset Select
HPF On/Off
Front LED On/Off
Indicators DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal

DSP

Presets FOH, MON, DJ
Polarity
HPF 100 Hz, 4th-order Linkwitz-Riley
Bit Depth 24-bit
Sample Rate 96 kHz

Enclosure

Material Eucalyptus Plywood
Finish Chemline™ polyurethane
Grille Powder-coated steel
Dimensions (HxDxW) 22” x 13.2” x 11.9” (559 mm x 335 mm x 302 mm)
Unit Weight 44 lbs. (19.96 kg)
Handles 2 (Top and Side)
Monitor Angle 30°

Safety

Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection limiter

Power

AC Power Input 100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power) 150W

Suspension Mounting

Rigging Points 12 M10
Mounting 35 mm, 2-position

Distribué par Algam / La boîte noire du Musicien

»

News

Autres catégories dans Enceintes de sonorisation

Où acheter ULT10 ?
Moins
  • Neuf
  • Occasion
Aucun revendeur ne propose ce produit pour le moment.
Alerte disponibilité
Il n’y a pas de petite annonce pour ce produit.
Alerte nouvelle annonce

On en parle dans les forums...