Sontronics STC-3X

• Fabricant : Sontronics
• Modèle : STC-3X
• Catégorie : Micros statiques à transistors à large membrane
• Fiche créée le : 01/11/2012

SONTRONICS STC-3X PACK

This all-in-one mic and accessories package is your complete solution for achieving professional-quality recordings at home or in the studio.

The NEW, British-designed Sontronics STC-3X multi-pattern condenser microhone features the three most commonly used polar patterns – cardioid, omnidirectional and figure-of-eight – plus filter and pad controls, making it a versatile, flexible workhorse in any recording situation.

The STC-3X gives stunning results on everything from vocals and spoken word to piano, acoustic guitar and other acoustic instruments, drums, ensemble, interview, podcast, room and overhead miking. It really does excel on anything you put in front of it!

The Sontronics STC-3X is available in black or silver and the mic comes in a single box with the following accessories:

• a spider-style shockmount (with spare elastics)

• a professional-quality, nylon-mesh popshield

• a 5-metre female-to-male XLR cable

• a vinyl, leather-look, zip-up microphone pouch

Like all of Sontronics mics, the STC-3X mic is protected by our FREE LIFETIME WARRANTY (simply activate online at www.sontronics.com/warranty.htm) and also comes with a FREE download of Toontrack’s EZdrummer Lite software.

Together, the whole Sontronics STC-3X PACK gives you a complete recording solution, and allows you to achieve the same quality recordings as you’d expect to hear in a professional studio. 

QUOTES:

“Our STC-3X mics have taken over in the studio. Their amazing clarity, balance and supreme versatility make everything else redundant!

“Out of the box, the STC-3X performs like a mic five times the cost!”

TECH SPECS

Microphone: Large-diaphragm condenser microphone

Polar patterns: Cardioid, omnidirectional, figure-of-eight

Capsule: Dual one-inch, gold-sputtered

High-pass filter: linear, 75Hz, 150Hz

Attenuation pad: 0dB, -10dB, -20dB

Frequency response: 20Hz to 20kHz

Sensitivity: 11mV/Pa –37dB ±2dB (0dB = 1V/Pa @ 1,000Hz)

Impedance: ≤200 Ohms

Equivalent noise level: 18dB (A-weighted)

Max. SPL: 125dB (for 0.5% THD @ 1,000Hz)

Power source: Phantom power 48V ±4V

Connector: Three-pin XLR (cable included)

Dimensions: 194 x 53 x 53mm

Weight: approx. 640g 

Distribué par Studio Dealers