BAE Audio 1028
+

BAE Audio 1028

  • J'aime
  • Tweet
  • Pin it

1028, Préampli à transistors de la marque BAE Audio.


1 avis d'utilisateur
Neuf à partir de 3 960 € Prix moyen : 4 075 €

Fiche technique BAE Audio 1028

  • Fabricant : BAE Audio
  • Modèle : 1028
  • Catégorie : Préamplis à transistors
  • Fiche créée le : 10/01/2011
  • Frequency Response
    • 10Hz to -3dB at 55kHz
  • 3 Band Equaliser
    • HF: +/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
    • LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
    • MF: +/-18dB +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz
  • High Pass Filter
    • 45Hz, 70Hz, 160Hz & 360Hz
  • Low Pass Filter
    • 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz & 18kHz
  • Mic Input Impedance
    • ≈1200/300 ohms
  • Line Input Impedance
    • 10k ohms
  • DI Input Impedance
    • ≈150k ohms
  • Output Impedance
    • 65 ohms
  • Common Mode Rejection Ratio
    • 100dB min @ 60Hz
  • Maximum Output Level
    • +27.4 dBu @ 600Ω
  • Power Requirements
    • 115/230 VAC, 28W
  • Gain dB
    • 0 to 80 dB
  • Equivalent Input Noise
    • -110 dBu; Unweighted 300kHz Bandwidth
  • Weight (Module/Rackmount)
    • 6 LBS/2.72 KG 10 LBS/4.54 KG
  • Dimensions in Inches (Module/Rackmount)
    • 45 mm W x 8.75 inches H x 10.5 inches D 19W x 1.75L x 9D

Source : http://www.baeaudio.com/products/1028

Distribué par Studio Dealers

»

Acheter neuf BAE Audio 1028

Global Audio Store
(86 avis)
1028 3 960 €
Global Audio Store
(86 avis)
1028 RACK 4 190 €

Avis utilisateurs BAE Audio 1028

Note moyenne :5.0(5/5 sur 1 avis)
 1 avis100 %
Rapport qualité/prix :
contenu en anglais
moosers10/01/2011

L'avis de moosers (contenu en anglais)

BAE Audio 1028
The Brent Averill 1028 is a single channel microphone preamplifier designed for use in professional recording studios. The 1028 has the same preamp as a Neve 1073, with slightly more options as far as equalization goes, borrowing the low pass filter from the Neve 1084. The 1028 has it's own power supply with XLR connections and has a 1/4" jack in the front for going directly in. It is rack mountable and will only take up a single space in traditional casings.

UTILIZATION

Using the Brent Averill 1028 isn't hard, or least I haven't found it hard to use at all. It has all the features you'd expect with a preamp, with built in phantom power, a phase reverse button, and a four band equalizer. There's also a button for switching it to DI mode, while the EQ has a high band, a low pass filter and two middle bands, with the preamp having knobs for line input and a more fine output knob. You can also set the ohms to either 300 or 1200. I haven't looked at a manual, nor do I think one will be necessary for most.

SOUND QUALITY

It's going to be hard to beat the sound of the Brent Averill 1028, as it's a true 1073 module. If you aren't aware, the 1073 (originally by Neve) is pretty much the best microphone preamp ever made, as you might find some that are comparable or have different colors, but it's going to be hard to say that any are better. It's a nice and round sound and isn't the slickest or cleanest in the world if that's the sound you're going for. Personally, I can't get enough of the preamp on here and the EQ is also incredibly, making it easy to dial in the perfect tone.

OVERALL OPINION

It would be hard to go wrong with Brent Averill 1028 when it comes to single channel microphone preamps. I love BAE because they have a full line of mostly modern day Neve gear at very reasonable prices considering what you're getting. I'd highly encourage anyone looking for a preamp to add to their high end home or professional studio to check out the 1028!
»

Découvrez d'autres produits !

Préamplis à transistors concurrents

Autres préamplis à transistors BAE Audio

Autres catégories dans Préamplis microphones

Autres dénominations : 10 28

Les cookies assurent le bon fonctionnement de nos services. En utilisant ces derniers, vous acceptez l'utilisation des cookies. En savoir plus.