Roland Factory Data Cassettes 60-106

ROLAND JUNO-60 FACTORY PATCHES
This file contains the original factory patches for both bank A and B of the Roland Juno-60

INSTRUCTIONS
1. Adjust the computer/player output level according to the JUNO-60 data check indicator.
2. Connect a mono audio cable from the output of the computer/player to the Juno-60 LOAD input.
3. Set The Memory Protect switch on the rear panel of the Juno-60 to OFF.
4. Begin playback.
5. Press the LOAD button [8] on the Juno-60.
6. The LOAD indicator will light up and the program number display window goes blank, showing that the data has started.
* Be sure to press the LOAD button before the modulation tone is heard.
7. When the load button goes out and the program number display window shows double dashes [-–] the loading is complete.
** If error message occurs adjust output level on your tape machine.
If the output level is too high or too low you will get an error message.
Experiment to find the proper level for your equipment.
Also make sure to press the load button at the right moment.