Annonces SDK2 Super Dinky
Alerte nouvelle annonceAvis
4.0/5(1 avis)
100 %
Donner un avis
HatsubaiSAS le modèle et le peuplier poupée uniques
Publié le 25/07/11 à 07:25
(contenu en anglais)The SDK2 is a pretty rare guitar, and I've only seen one come through the shop before that I can remember. The headstock is a dead giveaway as to what it is, and this headstock can actually be seen (somewhat) on the new Chris Broderick models. The guitar has the following specs:
Basswood body
Maple bolt-on neck
Rosewood fretboard with 22 jumbo frets
HSH configuration
No binding
Jackson licensed floyd rose
Dot inlays
Five way switch
Master volume and master tone knobs
UTILIZATION
The guitar was put together fairly well, and it aged decent considering its age. Aside from the various indents on the frets from the wear, I noticed that the frets could use a good level. Once I started adjusting the action, I noticed a few dead spots here and there. A nice fret level would fix that up no problem. The neck joint was fairly tight, so no issues in that department. The biggest thing that I had an issue with was the bridge installed on this guitar. It's one of those cheaper model floyd roses that tend to feel a bit stiff and not have the hardened steel that the original floyd rose has. If you get one of these, I recommend replacing it with an original floyd rose for better tuning stability and tone.
SOUNDS
I'm not the biggest fan of poplar wood. It just kinda sounds odd to me, but it could be because I don't use it often. The bridge sounded a bit bright, but it was also kinda loose. It reminded me of a cheap JB copy, and I almost think that's what they were going for. It lacked the clarity and note separation the original JB has, though. The neck was also a bit bright, but it was workable. I was able to get a decent lead tone out of this. Split positions were cool for clean tones, but I couldn't tell you how good the middle sounded alone as I never really used it. I only use the middle position for split tones.
OVERALL OPINION
See if you can find one of these on eBay or the guitar forums. You should be able to get a pretty killer deal on these. Keep in mind that they have 22 frets instead of the normal 24 frets, so that may or may not be a deal breaker, depending on what your priorities are. Also, make sure you like poplar as a tone wood.
Basswood body
Maple bolt-on neck
Rosewood fretboard with 22 jumbo frets
HSH configuration
No binding
Jackson licensed floyd rose
Dot inlays
Five way switch
Master volume and master tone knobs
UTILIZATION
The guitar was put together fairly well, and it aged decent considering its age. Aside from the various indents on the frets from the wear, I noticed that the frets could use a good level. Once I started adjusting the action, I noticed a few dead spots here and there. A nice fret level would fix that up no problem. The neck joint was fairly tight, so no issues in that department. The biggest thing that I had an issue with was the bridge installed on this guitar. It's one of those cheaper model floyd roses that tend to feel a bit stiff and not have the hardened steel that the original floyd rose has. If you get one of these, I recommend replacing it with an original floyd rose for better tuning stability and tone.
SOUNDS
I'm not the biggest fan of poplar wood. It just kinda sounds odd to me, but it could be because I don't use it often. The bridge sounded a bit bright, but it was also kinda loose. It reminded me of a cheap JB copy, and I almost think that's what they were going for. It lacked the clarity and note separation the original JB has, though. The neck was also a bit bright, but it was workable. I was able to get a decent lead tone out of this. Split positions were cool for clean tones, but I couldn't tell you how good the middle sounded alone as I never really used it. I only use the middle position for split tones.
OVERALL OPINION
See if you can find one of these on eBay or the guitar forums. You should be able to get a pretty killer deal on these. Keep in mind that they have 22 frets instead of the normal 24 frets, so that may or may not be a deal breaker, depending on what your priorities are. Also, make sure you like poplar as a tone wood.
00
»
Fiche technique
- Fabricant : Jackson
- Modèle : SDK2 Super Dinky
- Série : Pro
- Catégorie : Guitares de forme SC
- Fiche créée le : 02/05/2008
Nous n'avons pas de fiche technique sur ce produit
mais votre aide est la bienvenue
Distribué par fenderfrance
»
Autres catégories dans Guitares électriques Solid Body
Autres dénominations : sdk2 super dinky, sdk2 superdinky, sdk2superdinky, sdk 2 super dinky, sdk2super dinky