Se connecter
Se connecter

ou
Créer un compte

ou

Sujet Micros

  • 6 réponses
  • 3 participants
  • 740 vues
  • 1 follower
Sujet de la discussion Micros
Bonjour, voila je voudrai savoir quelles sont les différences (au niveau fréquentiel) entre un simple bobinage et un double dans le but de créer un boost qui me permettrait de simuler un double bobinage avec des simples....
Merci.
2
Alors, personne???
3
Je schematise a mort mais en gros:
- Humbucker : pas mal de basse et de medium, moin d'aigue.
- single coil : pas mal d'aigue et de medium, moin de basses.

mais bon comme tout les micros on des réponse differente ca peut etre faut.
le truc que tu veu faire existe deja chez EMG, l'EMG SPC (strat presence controle) qui transforme le son d'un single en simili humbucker et aussi l'EMG RPC qui lui change le son d'un humbucker en celui d'un single coil.
voilou

EMG-SPC
EMG-RPC
4
Seymour Duncan fait pas une pédale dans le genre aussi ?

Better to be hated for who you are, than loved for who you are not

5
Et ben si



SFX-01 Pickup Booster Pedal
The first effects pedal designed specifically to work together with the pickups in your instrument to achieve optimum gain and resonance for all your tonal applications. Turn the knob to dial in pure, flat-EQ gain, ranging from 6dB, all the way to an astonishing 25dB!
In addition, the Pickup Booster can add thickness to a single coil pickup. By engaging the Resonance Switch, the resonant peak of a single coil pickup can be lowered, making a Strat® pickup sound similar to a vintage humbucker or even a high-output humbucker.

Specs:
Gain range: 6 to 25 dB
Pickup Resonance Switch: Makes a single coil sound like a vintage humbucker ( "1" ) or high output humbucker ( "2" ).
"1" - Resonance shift down 2-3kHz
"0" - Resonance is not affected
"2" - Resonance shifts down 3-5kHz
Bypass: True bypass
Noise: -120 dBV (referred to input with gain set at 25dB)
Type of circuitry: Fully discrete, class A
Distortion: < 0.1%
Power: DC 9-12 V battery, or regulated DC adapter
Current consumption: 3.5mA @ 9V ( when LED is "on" ), 1.5mA @ 9V ( when LED is "off" )
Input impedance: 500K ( when effect is "on" ), Open ( when effect is "off" )
Output impedance: 5K ohms
Dimensions: 2.5" x 5" x 2" (W x L x H) (6.35cm x 12.7cm x 5.08 cm)
Weight: 0.8 lb. Without battery, 0.9 lb. With battery
Chassis material: Heavy duty 1.6 mm steel

Better to be hated for who you are, than loved for who you are not

6
Ok, donc il faudra un filtre passe bas avec une frequence de coupure dans le haut medium???
Sinon, ça vaut combien le truc de chez EMG???? il n'y a rien sur Thomann, enfin j'ai pas trouvé....
7
Alors, il n'y aucun suivi des posts ici :mdr: :mdr: