Pédaliers/Contrôleurs d'occasion

B-Stock, JHS Pedals Switchback, A/B / Looper switcher, usable as A/B true bypass looper, simple true bypass looper, A/B box, amp input switcher or effects loop A/B switcher, controllable by JHS Red Remote, Loop 1/2 toggle switch for selecting between Send/Return Loops 1 and 2, status LEDs, metal housing, 2 x 6.3 mm mono Send (1/2) jacks, 2 x 6.3 mm mono Return (1/2) jacks, 6.3 mm mono Guitar input jack, 6.3 mm mono Amp output jack, 6.3 mm TS Remote input jack, power supply via optional 9V DC adapter, 2.1 mm x 5.5 mm barrel plug, polarity negative (-) center, battery operation not supported, current draw less than 100 mA, dimensions (W x D x H) 65 x 115 x 45 mm, weight 300 g, made in USA, B-Stock with full warranty, may have slight traces of use

B-Stock, Electro Harmonix Tri Parallel Mixer; Effects Pedal for Electric Guitar; Three separate FX loops with flexible controls allow for the following configurations: run up to three FX Loops in parallel, Switch seamlessly between FX Loops in XOR mode, Send one instrument out to three separate amplifiers, Mix three instruments into a single output; Controls: Dry Vol, Master Vol, (CH1, 2 &3): Return, Send, EQ, Phase; LED: CH1, CH2, CH3 Active; Footswitches: CH1, CH2, CH3; Connections: Input (1/4"" Jack), Output (1/4"" Jack), Send 1, 2 & 3 (3 x 1/4"" Jack), Return 1, 2 & 3 (3 x 1/4"" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 45 mA; powered by a 9 V DC Power Supply (included); no Battery operation; Dimensions (W x D x H): 146 x 121 x 64 mm (5,75"" x 4,75"" x 2,5""), B-Stock with full warranty, may have slight traces of use

B-Stock, Vox VFS5 Footswitch - suitable for Vox VT 15/30/50/100, VT plus Valvetronix and VT20x/40x/100x, sound select, FX on/off, 5 push-buttons (bank, channel 1-4), 5m fixed cable., B-Stock with full warranty, may have slight traces of use

Vends Xotic SXB-1 Stereo X-Blender, excellent état Très peu utilisé. A récupérer sur Bordeaux ou envoi possible. Musicalement

Comme neuf, dans sa boite d'origine. Avec facture, acheté sur Thomann et utilisé pour un unique concert d'un projet vite avorté... Rien à dire, simple d'emploi, pratique, robuste et transparent.

B-Stock, One Control Xenagama Tail Loop MKIII - 3-Channel Loop Switcher with BJF Buffer; 3-channel true bypass loop switcher for effects pedals, footswitches provide control over three independent loops and a separate tuner output, high quality BJF Buffer (switchable), 4x DC barrel plug outputs (2.1 x 5.5 mm) for power through connection, true bypass, 4 footswitches (Loop 1, Loop 2, Loop 3, Tuner Out/Mute), status LEDs, metal housing, 6.3 mm mono jack inputs / outputs, power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside, passive operation possible without power supply (status LEDs, BJF buffer and DC barrel plug outputs without function), battery operation not supported, current draw max. 13 mA, dimensions (L x W x H) 41 x 244 x 46 mm / 1.61"" x 9,60"" x 1.81"", weight 310 g / 0.68 lbs, B-Stock with full warranty, may have slight traces of use

B-Stock, Boss FS-5L, latch-type footswitch, polarity at LED-function switchable, On/ off display (just works with 2x AA batteries), Rugged construction, Connectors: 6.3 mm jack, Dimensions (LxWxH): 95 x 89 x 50 mm, B-Stock with full warranty, may have slight traces of use

B-Stock, Vox VFS2A - original footswitch for Vox amps. Suitable for Vox AC30 C2 and Vox AC30 C2 Blue Bulldog. Cable length: 2m, B-Stock with full warranty, may have slight traces of use

B-Stock, KMA Audio Machines Dual Loop Switcher; Loop Switcher for Effects; Easy to use; Switch or combine two serial loops, in Mono or Stereo/Dual Mono; Active Silent Soft Switching, heavily reduces mechanical noise and pops; LED: Effect On; Footswitches: Effect Bypass; Connections: Input (1/4"" TRS-Jack), Output (1/4"" TRS-Jack), Send & Return A (2 x 1/4"" Jack), Send & Return B (2 x 1/4"" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 55 mA; powered by a 9 V Battery or a 9 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939; Dimensions: (W x D x H): 112 x 65 x 56 mm (4,41"" x 2,56"" x 2,2""); Weight: 260 g (0,57 lbs); Made in Germany, B-Stock with full warranty, may have slight traces of use

B-Stock, One Control Mosquito Blender Trail; wet/dry blender for effects pedals, switchable buffer, switchable phase shift of the loop and switchable trail mode, controls for Dry, Wet, Trail on/off switch, Phase +/- switch, Buffer on/off switch, bypass footswitch, status LED, metal housing, 2x 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 12 mA, dimensions (L x W x H) 94 x 48 x 35 mm / 3.85"" x 1.89"" x 1.38"", weight 230 g / 0.51 lbs, B-Stock with full warranty, may have slight traces of use

B-Stock, Behringer FCV 100 V2 Pedal for Volume and Modulation Control - switchable polarity, 2x Output, dimensions 113 x 117 x 248 mm, weight 1,15 kg, attention: pedal works only with 9V batterie or 12V DC power supply ! (batterie and power supply not included), power supply optional: Thomann NT1215 (#188460), B-Stock with full warranty, may have traces of use.

B-Stock, Harley Benton StompControl-4 ISO, programmable loop switcher with integrated isolated multiple power supply, 4-loop programmable switcher, 4 patches, 5 banks, 20 presets, tuner out, on/off switches with status LED, easy read LED display, simple operation, integrated all isolated multiple power supply: input: 12V/2A, outputs: 2x9V 100mA, 2x9V 300mA, 1x9V 500mA outputs, overload & short circuit protection, the total output load must not exceed 1300mA / 1,3A , included: 12V 2A adapter & 5 x DC 60cm cables, dimension: H 335 x W 75 x D 45 mm, weight: 0,69 kg, B-Stock with full warranty, may have slight traces of use

B-Stock, KMA Machines Active AB/Y Switch; Active Switching Pedal for Electric Guitar & Bass; switches or combines a mono input signal between two separate outputs, switches or combines two separate input signals into one output; Phase and Y direction switches for greater flexibility; Active silent relay-based soft switching, heavily reduces mechanical noise and pops; Durable compact enclosure for years of reliable switching; Controls: ; Push Buttons: ; LED: A, B, Y; Display: ; Footswitches: A / B, A & B; Switches: Phase, Y Direction (Y>AB/AB>Y); Connections: A, B & Y (3 x 1/4"" Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 55 mA; powered by a 9 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939; True Bypass; Dimensions (W x D x H): 112 x 65 x 56 mm (4.41"" x 2.56"" x 2.2""); Weight: 250 g (0.55 lbs); Handmade in Germany; Note: Battery operation is not supported, B-Stock with full warranty, may have slight traces of use

B-Stock, Hotone Ampero Press; Effects Pedal for Electric Guitar; compact 2-in-1 passive volume/expression pedal for electric guitar; Suitable for controlling multi-effects of the Ampero series and many other effect devices; potentiometer resistance Volume: 100kO, Expression: 10kO; Connections: Input (1/4"" Jack), Output (1/4"" Jack), EXP Out (1/4"" TRS-Jack); Dimensions (W x D x H): 81 x 162 x 51 mm (3,19"" x 6,38"" x 2,01""); Weight: 430 g (0,95 lbs), B-Stock with full warranty, may have slight traces of use

B-Stock, Radial Engineering Bigshot I/O, instrument switcher/selector, 100% passive, true bypass (via TRIM switch), 2 instrument inputs, separate tuner output, volume control for reducing level of Input 2, tuner out switch for selecting whether tuner out is always on or only when mute footswitch pressed, TRIM switch for bypassing the volume and bright switch, 3-way bright switch for compensating high frequency loss, mute footswitch, select footswitch, status LEDs, metal housing, 6.3 mm mono in-/output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm, polarity (-) center (not included), battery operation not supported, power supply only required for indicator LEDs, dimensions (L x W x H): 100 mm x 100 mm x 52 mm, weight: 560 g, made in canada., B-Stock with full warranty, may have slight traces of use

B-Stock, Harley Benton Custom Line True-Bypass Dual Loop Switch, for electric guitar bass & keyboard, boutique-style switching tool with two independent true bypass loops in one box, hook up whole signal chains of effects to the loop and the chain can be turned on and off with one footswitch, empty loop can be used as a mute switch, to use as amp switcher connect each send jack to different amplifier inputs, controls: input/out put jacks, send/return a/b jacks, 2xon/off switche with LED status, toogle switch on/off loop control indicator, powered via 9V power supply (not included, optional #409939) or 9V battery, pedal size incl. knobs (W x H x D) 120 x 56 x 95 mm, weight excl. battery and packaging 0,380 kg, B-Stock with full warranty, may have slight traces of use

Chase bliss Faves, pédale neuve, dans sa boite. d'origine avec tout ses accessoires, première main, avec facture.

Je n'ai plus besoin de ce pédalier que j'ai fabriqué alors que le footswitch modèle FS12 de mon ampli Blackstar était en rupture pendant plusieurs mois. C'est donc l'équivalent du Blackstar FS18, compatible avec beaucoup d'amplis Marshall, Laney, Peavey, Roland...etc Boitier aluminium moulé et 2 interrupteurs à contact permanent (de type "latched" ou "à verrouillage") Câble de longueur 4 mètres de type double qui permet le montage de 2 jacks mono si nécessaire VOIR MES AUTRES ANNONCES POUR UNE REDUCTION EVENTUELLE ANNONCE EN LIGNE = PRODUIT DISPONIBLE

Vends ce Disaster Area DPC 8EZ, comme neuf. Il n'a jamais servi, il est comme neuf, premiere main acheté sur Loopersparadise. C'est tout simplement le controleur/looper/switcher midi (in/out) le plus compact du marché avec ses 8 boucles pour pédales + 1 boucle d'insert. Ca fait 9 boucles. Les 8 boucles peuvent être utilisées pour 8 pédales mono ou 4 pédales stereo (ou plus si vous mettez plusieurs effets par boucle). Controle direct des 8 boucles au pied ou programmation par preset. Vendue avec sa boite d'origine. prix neuf actuellement 439 euros. Vendu 220 euros frais de ports inclus pour la France metropolitaine.

Vends pédale Tone In Progress T.I.P (Pour Tone In Progress) Cette pédale permet de contrôler au pied la rotation d'un potard d'effet. Ex : filtre d'enveloppe, niveau de sortie, distorsion… modulation d'un chorus… Bref, ce que vous voulez tant que le capuchon du potard peut s'enlever. Voir photos. Cela parait "gadget" inspecteur, non? Oui, mais utilisé à bon escient, c'est super pratique et permet des bidouilles inattendues… sans se mettre à genoux. D'où le nom judicieux de 3rdHand et qui parle de lui-même. Utilisée ponctuellement, je n'en ai plus l'utilité. La pédale est fiable, lourde et prend de la place. D'une qualité irréprochable, malgré quelques petits défauts cosmétique. Assez robuste pour soulever un meuble… mais bon, ce n'est pas fait pour ! J'ajoute la clé à lane qui permet de procéder à l'assemblage des différentes parties. T.IP 3rd Hand